Videos

Product Features

Intro to Hyrel 3D Possiblilities, Jan 2016: https://www.youtube.com/watch?v=MwrhV74NjCQ
Selecting the Right Printer: https://www.youtube.com/watch?v=vc9gBZtUL7c
Intro to Hyrel 3D Possibilities: https://youtu.be/4oxCqR_DVNQ
Printing four parts at once (ABS): https://www.youtube.com/watch?v=xQFacnpzmv0
Printing three parts at once (ABS), with the "Clone Head" feature: https://youtu.be/cuRcIE-Jbyc
Printing two parts at once (plasticine): https://www.youtube.com/watch?v=P6aMBQSZPgg
Introducing the System 30: https://www.youtube.com/watch?v=c9HvQ3SepoM
Sped-up video of the Gear Vase print: https://www.youtube.com/watch?v=DaIrESgjNSA
Introducing the hot-swappable Print Heads: https://www.youtube.com/watch?v=XNwv7Dw_Zwg
Introducing the Developer's Kit (SDK): https://www.youtube.com/watch?v=-VHxf182fIs
Introducing the Shark5 Laser: https://www.youtube.com/watch?v=0lpa4nENtyQ
Introducing the Luer Tip Kit: https://www.youtube.com/watch?v=mPYPWjnDGho
Introducing Hyrel 2.4 and Slicing 2 stls for 2 heads: https://www.youtube.com/watch?v=VMyS3h4qiSA
Introducing Hyrel 2.4 and Inserting new Temperature and Fan Speed gcode: https://www.youtube.com/watch?v=4REXwbuTvzQ
Sneak Peek: Pick and Place Head: https://www.youtube.com/watch?v=BlSGlOpyipI
Introducing the SDS Syringe Heads: https://www.youtube.com/watch?v=XKHa1CXnSdI
Introducing the LA6-450 Laser (6w, 450nm): https://www.youtube.com/watch?v=O1IGa-8y9yQ
Introducing the MK2-250 Head for Flexible Filaments: https://www.youtube.com/watch?v=V_zCytnGvvo

Here are some basic instructions; a more structured presentation can bee seen at the Instructions page.

Loading and Unloading Filament in the MK-1 head: http://youtu.be/Llas80vYFPc
MK1 Series Printing Tips: https://www.youtube.com/watch?v=Fg9omXlYR-Q
Post Processing with a Heat Gun: https://www.youtube.com/watch?v=0Aj9WCabPgw
Loading and Printing with the MK1-250: https://www.youtube.com/watch?v=v2ifSlZ0qEw
Alternate Method of Loading Flexible Filament into the MK1-250: https://www.youtube.com/watch?v=lxCQ6GnTdhk
Loading and Printing with the MK2-250: https://www.youtube.com/watch?v=0dS3bC0BnRQ

NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
Updating Slic3r Settings: http://youtu.be/A0I6Xu9Tlvc
Multi-Head Calibration Guide: https://www.youtube.com/watch?v=IQscrgv6uaQ
To replace your Tablet Interface Board; also to run from an external PC (start at 6:24): https://youtu.be/b583I7AlGJI
Adjusting the X-Arm: https://youtu.be/0gFX6Mh-ths
Tightening the X Belt: https://www.youtube.com/watch?v=4GYWfMrs0F8
Adjusting the Y-Arm: https://youtu.be/LZd0ecogGlQ
Tightening the Y Belt: https://www.youtube.com/watch?v=IkgviAGep-c
Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8
Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c
Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUI
Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o
Replacing the 103 HotHead Controller: https://youtu.be/XKCEkKSolZc
Updating the 407 Motion Controller: https://youtu.be/cFAFRkpLmww
Changing the Print Head PCB: https://www.youtube.com/watch?v=XKCEkKSolZc
Changing the Main I/O Board: https://www.youtube.com/watch?v=66S9XJ-KeU8