Videos

Main Table

UNDER CONSTRUCTION - I hate saying that.

---

Please also see the Instructions page and the Help page.

Remember, you can CTRL+F to search for a keyword on this page!

The following chart compares and contrasts the various heads:

Live Table of Video Links

Thumbnail	Title	Link	Date	Model	Category	Activity	Material Type	Other
	Engine HR Scaffold Instructions	https://www.youtube.com/watch?v=uC7acwIkKmQ	2017.06.26	Engine HR	Hardware	Operation	Non-Filament	Scaffold
	Engine HR Scaffold Intro	https://www.youtube.com/watch?v=b1x2dvdYkTE	2017.06.26	Engine HR	Hardware	Instruction	Non-Filament	Scaffold
	Unclogging a rare clogged MK1-250	https://www.youtube.com/watch?v=oisWKujfXAI	2017.06.22	MK1-250, MK2-250	Hardware	Maintenance	Filament	Clog
	Unclogging a rare clogged MK1-450	https://www.youtube.com/watch?v=6FQJuhd2Lxo	2017.06.22	MK1-450	Hardware	Maintenance	Filament	Clog
	Flashing Firmware on the Modified CO2 Laser Controller	https://www.youtube.com/watch?v=WrImt7_Pnxo	2017.06.21	CO2 Laser	Firmware	Upgrade	Laser	n/a
	The Hyrel Hydra Family	https://www.youtube.com/watch?v=1J5bqvcV3Rs	3017.06.06	Hydra	Hardware	Demonstration	All	n/a
	High Resolution Engine Vacuum Bed	https://www.youtube.com/watch?v=CF7eRdFuZYQ	2017.05.22	Engine HR	Hardware	Demonstration	Any	Vacuum Bed
	High Resolution Engine Setup	https://www.youtube.com/watch?v=eltjeQ6KerM	2017.05.09	Engine HR	Hardware	Instructions	Any	n/a
	SDS Clench Valve Assembly Instructions	https://www.youtube.com/watch?v=SvX4gKqAQDI	2017.05.19	SDS	Hardware	Instructions	Non-Filament	n/a
	How to Load the SDS Clench Valve	https://www.youtube.com/watch?v=Mz5J8jsb6D4	2017.05.16	SDS (all EMO-type)	Hardware	Installation	Non-Filament	n/a
	Engine HR Accuracy Test	https://www.youtube.com/watch?v=JwKq8_tahYA	2017.05.16	Engine HR	Hardware	Demonstration	All	n/a
	Hydra 430, 640, 645 Controls Overview	https://www.youtube.com/watch?v=Udbu_Zuh8k0	2017.05.08	Hydra 430, 640, 645	Hardware	Overview	All	n/a
	Using Low Temperature Solder Paste to connect a Flat Flex Cable	https://www.youtube.com/watch?v=cClPqIJwhLs	2017.04.17	n/a	Hardware	Demonstration	Solder Paste	n/a
	Draining Laser Coolant on the Hyrel Hydra	https://www.youtube.com/watch?v=GCzPw4FOG8c	2017.04.13	Hydra 640, 645	Hardware	Maintenance	Laser	n/a
	Hydra Home Calibration Details	https://www.youtube.com/watch?v=pPtGSwyS140	2017.04.07	Hydra (All)	Firmware	Settings	n/a	n/a
	Replacing the top component on an STS Head Assembly	https://www.youtube.com/watch?v=LLIWqTRBhTo	2017.04.05	SDS	Hardware	Maintenance	Non-filament	n/a
	HYDRA Hot Bed Installation	https://www.youtube.com/watch?v=qxbtI034omk	2017.03.22	Hydra (All)	Hardware	Installation	All	n/a
	Hydra Model Startup	https://www.youtube.com/watch?v=fuLCsqfAX3E	2017.03.22	Hydra (All)	Hardware	Startup	All	n/a
	Unboxing the Hydra Floor Model Units	https://www.youtube.com/watch?v=LhnV9H7LV9g	2017.03.19	Hydra (All)	Hardware	Startup	All	n/a
	Hydra Overview by CTO Karl Gifford	https://www.youtube.com/watch?v=ULpn18OqD-U	2017.03.09	Hydra (All	Hardware	Overview	All	n/a
	How to Manage the Pick-and-Place with Repetrel Software	https://www.youtube.com/watch?v=QEfskyU7LJ4	2017.03.02	PNP	Hardware	Setup	PNP	n/a
	Hyrel Hydra Versitility	https://www.youtube.com/watch?v=Jz3onGdmW1c	2017.02.08	Hydra (All)	Hardware	Introduction	All	n/a
	Hydra Vinyl Cutter Overview	https://www.youtube.com/watch?v=pKkrd4R_54Y	2017.02.16	Hydra (All)	Hardware	Demonstration	Vinyl	n/a
	Hyrel 3D Hydra Pick-and-Place Introduction	https://www.youtube.com/watch?v=haKWeCbXkMI	2017.02.10	Hydra (All)	Hardware	Introduction	Pick-And-Place	n/a
	The Hyrel3D Hydra Line	https://www.youtube.com/watch?v=uACoqtNbXE0	2017.01.26	Hydra	Hardware	Introduction	All	n/a
	Tramming the bed on the 16A	https://www.youtube.com/watch?v=KAoSS-Z-aeY	2017.01.19	Hydra (All)	Hardware	Maintenance	n/a	n/a
	The Benefits of Microscope Inspection During Printing	https://www.youtube.com/watch?v=tibkVZB_n9c	2017.01.06	All	Hardware	Instruction	All	n/a
	Printing PLGA for internal Biological Applications	https://www.youtube.com/watch?v=aR4d-2BZj_Y	2017.01.02	All	Hardware	Maintenance	Emulsion	n/a
	Varialble Width Conductive Paste Extrusion	https://www.youtube.com/watch?v=Z4IGQ5JMP6g	2016.12.30	All	Hardware	Introduction	Emulsion	n/a
	Microscope Print View Setup	https://www.youtube.com/watch?v=2f5FEhVsqy8	2016.12.30	All	Hardware	Maintenance	All	n/a
	Replacing the LED Strip	https://www.youtube.com/watch?v=D2sWEYRVAII	2016.12.23	System 30M	Hardware	Maintenance	LEDs	n/a
	Replacing the Front Switch Panel	https://www.youtube.com/watch?v=14ynZ3DHzVg	2016.12.23	System 30M	Hardware	Maintenance	Switch Panel	n/a
	Static Mixing Head Explained - v2 Including SDS Heads	https://www.youtube.com/watch?v=DQj6oLfrbLo	2016.12.20	All	Hardware	Introduction	Emulsion	n/a
	Hot Bed Manufacturing	https://www.youtube.com/watch?v=_vJXnB-8JII	2016.12.16	Hydra	Hardware	Instruction	All	HotBed
	Static Mixing Head Explained	https://www.youtube.com/watch?v=3azICOBuHdk	2016.12.15	MODEL	Hardware	Instruction	Emulsion	Static Mixing

Editing Table

Printer Model Comparison

Thumbnail	Title	Link	Date	Model	Category	Activity	Material Type	Other
200px	TITLE	https://www.youtube.com/watch?v=	2016.12	MODEL	Hardware	Maintenance	Filament	n/a
200px	TITLE	https://www.youtube.com/watch?v=	2016.12	MODEL	Hardware	Maintenance	Filament	n/a
200px	TITLE	https://www.youtube.com/watch?v=	2016.12.	MODEL	Hardware	Maintenance	Filament	n/a