Videos

There be videos here.

Taking your idea from Concept to Reality: http://youtu.be/pgkGX3ckjg4

Product Features

• Printing four parts at once (ABS): https://www.youtube.com/watch?v=xQFacnpzmv0
• Introducing the System 30: https://www.youtube.com/watch?v=c9HvQ3SepoM
• Printing two parts at once (plasticine): https://www.youtube.com/watch?v=P6aMBQSZPgg
• Sped-up video of the Gear Vase print: https://www.youtube.com/watch?v=DaIrESgjNSA
• Taking your idea from Concept to Reality: http://youtu.be/pgkGX3ckjg4
• Introducing the hot-swappable Print Heads: https://www.youtube.com/watch?v=XNwv7Dw_Zwg

Print Material

• Printing in Sugru (Rubber): https://www.youtube.com/watch?v=nuii5rP53Js
• Printing in Air-dry Modeling Clay: https://www.youtube.com/watch?v=trdz4YDbdsw
• Printing in Plasticine: https://www.youtube.com/watch?v=cw8XiW46G0k
• Printing in Play-Doh: https://www.youtube.com/watch?v=dihvAQR7LQg

Instructions

• Tramming the heated build platform: https://www.youtube.com/watch?v=soY9uOw3nCM
• Unpacking the System 30: https://www.youtube.com/watch?v=qBmpCQVkDbc
• Loading the EMO-25: https://www.youtube.com/watch?v=4yuzpUqeE-Y
• Setting up custom gcode: https://www.youtube.com/watch?v=tIAQT0SBR-g
• Creating a part with support material: https://www.youtube.com/watch?v=QL9nxP_Lg1U
• How to reset the printer if the motion controller hangs: https://www.youtube.com/watch?v=B_UxIuG3i4M
• Loading and Unloading Filament in the MK-1 head: http://youtu.be/Llas80vYFPc
• Updating Slic3r Settings: http://youtu.be/A0I6Xu9Tlvc

Product Maintenance

• Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c
• How to reset the printer if the motion controller hangs: https://www.youtube.com/watch?v=B_UxIuG3i4M

Links to Justin.TV broadcasts

Recent

• Our 15 Jun 2014 broadcast
• Our 25 Jun 2014 broadcast
• Our 13 Jul 2014 broadcast
• Our 03 Aug 2014 broadcast
• Our 10 Aug 2014 broadcast