Difference between revisions of "Videos"
(→Product Features) |
(→Instructions) |
||
| Line 49: | Line 49: | ||
* Print Heads Overview, June 2016: https://www.youtube.com/watch?v=xGriCCrfkuw | * Print Heads Overview, June 2016: https://www.youtube.com/watch?v=xGriCCrfkuw | ||
| − | == Instructions == | + | == '''Instructions''' == |
Here are some basic instructions; a more structured presentation can be seen at the [[Instructions]] page. | Here are some basic instructions; a more structured presentation can be seen at the [[Instructions]] page. | ||
| Line 55: | Line 55: | ||
=== Training Lessons === | === Training Lessons === | ||
| − | ==== Session One: | + | ==== Session One: Basics and Emulsifiables ==== |
# [https://www.youtube.com/watch?v=mVyCq7CPGLg Session 1A: Hardware and Software Overview] | # [https://www.youtube.com/watch?v=mVyCq7CPGLg Session 1A: Hardware and Software Overview] | ||
| Line 61: | Line 61: | ||
# [https://www.youtube.com/watch?v=lFATCfKJf4I Session 1C: Setting Z-Zero and Emulsifiable Print] | # [https://www.youtube.com/watch?v=lFATCfKJf4I Session 1C: Setting Z-Zero and Emulsifiable Print] | ||
| − | ==== Session Two: | + | ==== Session Two: Modeling and Filaments ==== |
# [https://www.youtube.com/watch?v=2yHRuef29L4 Session 2A: Simple CAD Modeling in FreeCAD] | # [https://www.youtube.com/watch?v=2yHRuef29L4 Session 2A: Simple CAD Modeling in FreeCAD] | ||
| Line 70: | Line 70: | ||
# [https://www.youtube.com/watch?v=v2ifSlZ0qEw Session 2F: Loading and Printing with Filaments] | # [https://www.youtube.com/watch?v=v2ifSlZ0qEw Session 2F: Loading and Printing with Filaments] | ||
| − | ==== Session Three: | + | ==== Session Three: One STL with Multiple Heads ==== |
# [https://www.youtube.com/watch?v=p1Ihd4ETxhg Session 3A - Setting Two Heads to Z-Zero] | # [https://www.youtube.com/watch?v=p1Ihd4ETxhg Session 3A - Setting Two Heads to Z-Zero] | ||
| Line 79: | Line 79: | ||
# Session 3D - [https://www.youtube.com/watch?v=cuRcIE-Jbyc Clone or Parallel Printing] | # Session 3D - [https://www.youtube.com/watch?v=cuRcIE-Jbyc Clone or Parallel Printing] | ||
| − | ==== Session Four: | + | ==== Session Four: Multiple STLs with Multiple Heads ==== |
# [https://www.youtube.com/watch?v=3KwJ6OgOx14 Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads] | # [https://www.youtube.com/watch?v=3KwJ6OgOx14 Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads] | ||
Revision as of 14:03, 28 November 2016
Please also see the Instructions page and the Getting Started page.
Our YouTube Page.
Product Features
- Test Print on a Model 16A: https://www.youtube.com/watch?v=Rc2UFwjUtc4
- Printing a test of an Extrusion: https://www.youtube.com/watch?v=Ql1NZLWVJQM
- Using a Hyrel3D Printer and Spindle Tool to rework Circuit Boards: https://www.youtube.com/watch?v=C88ni0huwhw
- Running a Fadal CNC with Hyrel software and motion controllers: https://www.youtube.com/watch?v=_nUZc-de_qg
- Introducing the Model 16A: https://www.youtube.com/watch?v=81sVBZOOcbw
- Intro to Hyrel 3D Possiblilities, Jan 2016: https://www.youtube.com/watch?v=MwrhV74NjCQ
- Selecting the Right Printer: https://www.youtube.com/watch?v=vc9gBZtUL7c
- Intro to Hyrel 3D Possibilities: https://youtu.be/4oxCqR_DVNQ
- Printing four parts at once (ABS): https://www.youtube.com/watch?v=xQFacnpzmv0
- Printing three parts at once (ABS), with the "Clone Head" feature: https://youtu.be/cuRcIE-Jbyc
- Printing two parts at once (plasticine): https://www.youtube.com/watch?v=P6aMBQSZPgg
- Introducing the System 30: https://www.youtube.com/watch?v=c9HvQ3SepoM
- Sped-up video of the Gear Vase print: https://www.youtube.com/watch?v=DaIrESgjNSA
- Introducing the hot-swappable Print Heads: https://www.youtube.com/watch?v=XNwv7Dw_Zwg
- Introducing the Developer's Kit (SDK): https://www.youtube.com/watch?v=-VHxf182fIs
- Introducing the Luer Tip Kit: https://www.youtube.com/watch?v=mPYPWjnDGho
- Introducing Hyrel 2.4 and Slicing 2 stls for 2 heads: https://www.youtube.com/watch?v=VMyS3h4qiSA
- Introducing Hyrel 2.4 and Inserting new Temperature and Fan Speed gcode: https://www.youtube.com/watch?v=4REXwbuTvzQ
- Sneak Peek: Pick and Place Head: https://www.youtube.com/watch?v=BlSGlOpyipI
- Introducing the SDS Syringe Heads: https://www.youtube.com/watch?v=XKHa1CXnSdI
- Introducing the LA5-808 Laser: https://www.youtube.com/watch?v=0lpa4nENtyQ
- Introducing the LA6-450 Laser (6w, 450nm): https://www.youtube.com/watch?v=O1IGa-8y9yQ
- Introducing the MK2-250 Head for Flexible Filaments: https://www.youtube.com/watch?v=V_zCytnGvvo
- Plasma Magnetic Vortex Deposition: https://www.youtube.com/watch?v=lQy25Nlj3_Q
- 3D Milling on the Hyrel Model 16A: https://www.youtube.com/watch?v=LQb5vS97jFo
- Bioplotting for under $10K: https://www.youtube.com/watch?v=XREWb_Md5o0
Print Material
- Printing in Sugru (Rubber): https://www.youtube.com/watch?v=nuii5rP53Js
- Printing in Air-dry Modeling Clay: https://www.youtube.com/watch?v=trdz4YDbdsw
- Printing in Plasticine: https://www.youtube.com/watch?v=cw8XiW46G0k
- Printing in Play-Doh: https://www.youtube.com/watch?v=dihvAQR7LQg
- Testing the Shark5 Laser: https://www.youtube.com/watch?v=yEePz8_0ttc
- Part Printed in NinjaFlex: https://www.youtube.com/watch?v=KJ76lRfpOJ4
- First Clay test print: https://www.youtube.com/watch?v=0gv71RAtdwg
- Model 16A Build Volume: https://www.youtube.com/watch?v=Rw2E_d-q9bQ
- Print Heads Overview, June 2016: https://www.youtube.com/watch?v=xGriCCrfkuw
Instructions
Here are some basic instructions; a more structured presentation can be seen at the Instructions page.
Training Lessons
Session One: Basics and Emulsifiables
- Session 1A: Hardware and Software Overview
- Session 1B: Communications and Tramming
- Session 1C: Setting Z-Zero and Emulsifiable Print
Session Two: Modeling and Filaments
- Session 2A: Simple CAD Modeling in FreeCAD
- Session 2B: Healing an STL in MeshLab
- Session 2C: Positioning, Scaling, and Rotating your STL
- Session 2D: Editing Slic3r Recipes
- Session 2E: Slicing your STL and Viewing your GCODE
- Session 2F: Loading and Printing with Filaments
Session Three: One STL with Multiple Heads
- Session 3A - Setting Two Heads to Z-Zero
- [[Session 3B - Calibrating the Offset Between Two Heads
- GCODE: Calibration Target
- Session 3C - Slicing and Printing with Second Head Support
- Session 3D - Clone or Parallel Printing
Session Four: Multiple STLs with Multiple Heads
General Information
- Quick Start Video: https://www.youtube.com/watch?v=vtfIq4RQ6_w
- Upgrading to Repetrel 2.4xx: https://www.youtube.com/watch?v=YyXFKYpzs30
- NEW Unboxing the System 30: https://www.youtube.com/watch?v=bHxC2__DPsM
- NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
- Manually Setting the Z-Zero Position: https://www.youtube.com/watch?v=ArDX4UpflmE
- Powering up the System: https://www.youtube.com/watch?v=h_crzan5T7Y
- How to use 3D PDFs: https://www.youtube.com/watch?v=DoBqTQ_qCUY
- First Print Walkthrough: https://www.youtube.com/watch?v=VNQNaz0Yzt4
- Programming Head Offsets: https://www.youtube.com/watch?v=9zxxBYbdlOE
- Multi-Head Printing with Nested STLs: https://www.youtube.com/watch?v=3KwJ6OgOx14
Filament Specific
- Overview of the MK1-250 extruder: https://www.youtube.com/watch?v=yaCYFmoIESk
- Overview of the MK2-250 extruder: https://www.youtube.com/watch?v=SOGKeU3vLbs
- Overview of the MK1-450 extruder: https://www.youtube.com/watch?v=UvZMecXsHEM
- Loading and Unloading Filament in the MK Series head: http://youtu.be/Llas80vYFPc
- MK Series Printing Tips: https://www.youtube.com/watch?v=Fg9omXlYR-Q
- Post Processing with a Heat Gun: https://www.youtube.com/watch?v=0Aj9WCabPgw
- Loading and Printing with the MK1-250: https://www.youtube.com/watch?v=v2ifSlZ0qEw
- Loading and Printing with the MK2-250: https://www.youtube.com/watch?v=0dS3bC0BnRQ
- Loading Filament in the MK1-250: https://www.youtube.com/watch?v=QMyuKdgiWI4
Emulsifiable Specific
- Overview of the EMO-25 and COD-25 Extruders: https://www.youtube.com/watch?v=ktK256u0sN8
- Loading the EMO-25: https://www.youtube.com/watch?v=4yuzpUqeE-Y
- More Loading the EMO-25: https://www.youtube.com/watch?v=IEmQJxlPnuY
- EMO Series Printing Tips: https://www.youtube.com/watch?v=tLHpaePTP-k
- Loading the VCD Head: https://www.youtube.com/watch?v=YWe3TQGgNW0
- Loading the SDS Head: https://www.youtube.com/watch?v=0JJp7HeK35M
- Loading the SDS Head with RTV: https://www.youtube.com/watch?v=ej55bZXrltA
- Loading and Printing with the EMO-25: https://www.youtube.com/watch?v=q-DbAbNMW48
GCode, Modeling and Slicing
- Creating a part with support material: https://www.youtube.com/watch?v=QL9nxP_Lg1U
- Intro to FreeCad: https://www.youtube.com/watch?v=2yHRuef29L4
- Healing with MeshLab: https://www.youtube.com/watch?v=eLGIRAgLz4w
- DXF to GCODE for the Laser: https://youtu.be/YRsyEGHyt3k
- Adding DavoPads (FrogToes/PrintStamps) to Anchor Large Prints: https://www.youtube.com/watch?v=zgcggw5BglA
- Slicing two nested STLs: https://www.youtube.com/watch?v=nfIvS50zLyc
Troubleshooting, Maintenance and Tuning
- Reestablishing Connectivity between PC and Printer: https://www.youtube.com/watch?v=RlJqdhtpB6Q
- Table Arm Block Adjustment for bed twist about the X or Y axes: https://youtu.be/ImMo3V1D70w
- Replacing the Heated Build Platform: https://youtu.be/FkJT3ILlAHw
- NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
- Updating Slic3r Settings: http://youtu.be/A0I6Xu9Tlvc
- Multi-Head Calibration Guide: https://www.youtube.com/watch?v=IQscrgv6uaQ
- To replace your Tablet Interface Board; also to run from an external PC (start at 6:24): https://youtu.be/b583I7AlGJI
- Adjusting the X-Arm: https://youtu.be/0gFX6Mh-ths
- Tightening the X Belt: https://www.youtube.com/watch?v=4GYWfMrs0F8
- Adjusting the Y-Arm: https://youtu.be/LZd0ecogGlQ
- Tightening the Y Belt: https://www.youtube.com/watch?v=IkgviAGep-c
- Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8
- Replacing the heated build platform: https://www.youtube.com/watch?v=ed8ZqZLsTJ8
- Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUI
- Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o
- Replacing the 103 HotHead Controller: https://youtu.be/XKCEkKSolZc
- Updating the 407 Motion Controller: https://youtu.be/cFAFRkpLmww
- Changing the Print Head PCB: https://www.youtube.com/watch?v=XKCEkKSolZc
- Changing the Main I/O Board: https://www.youtube.com/watch?v=66S9XJ-KeU8
- Configuring the USB-B to run from another coputer: https://www.youtube.com/watch?v=uPqr4S0WC3Q
- Assembling the new PEEK Fan Nozzle: https://www.youtube.com/watch?v=ysO8oAzFwC4
Archives
- Original Kickstarter Video: https://www.youtube.com/watch?v=3UnMxL2bw4o
- Shop Tour: https://www.youtube.com/watch?v=Z9rgkw5r4l4
- Tramming the heated build platform: https://www.youtube.com/watch?v=soY9uOw3nCM
- Software Teaser: https://www.youtube.com/watch?v=CBaQZjpPqFU
- Big Nerd Ranch Talk: https://www.youtube.com/watch?v=jdoN_1jP8Ks
- Upgrading to Repetrel 2.x: https://www.youtube.com/watch?v=n4QwiuQtjO0
- ColumbusMAKESit Printer Burn-in: https://www.youtube.com/watch?v=UEfeVYbbKPQ
- Engine Sneak Peek (Four Materials): https://www.youtube.com/watch?v=_TjGIa60vAg
- Kids test 3D Printed Hockey Pucks: https://www.youtube.com/watch?v=xYttqVDkY2c
- Repetrel 1.806 New Features: https://www.youtube.com/watch?v=TZUeh6Bkwu8
- Setting up custom gcode: https://www.youtube.com/watch?v=tIAQT0SBR-g
