Test4
Contents
3 Movement
| Controlling Movement | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
| G1 | Yes | Working Move |
| G2 | Yes | Clockwise Arc |
| G2.1 | Yes | Spiral CW Arc1 |
| G2.2 | Yes | Spiral CW Arc2 |
| G2.3 | Yes | 3-Space CW Spiral Arc |
| G3 | Yes | Counterclockwise Arc |
| G3.1 | Yes | Spiral CCW Arc1 |
| G3.2 | Yes | Spiral CCW Arc2 |
| G3.3 | Yes | 3-Space CCW Spiral Arc |
| G4 | Yes | Timed Pause |
| G16 | Yes | Arc in Any Plane |
| G17 | Yes | Arc in XY Plane |
| G18 | Yes | Arc in XZ Plane |
| G19 | Yes | Arc in YZ Plane |
| M0 | Yes | Stop Until Resume |
| M203 | Yes | Set G0 Speed |
4 Temperature
| Controlling Temperature | ||
|---|---|---|
| Code | Supported | Brief Description |
| M104 | Yes | Set Temp (Head) |
| M106 | Yes | Set Cooling / Etc. |
| M107 | Yes | Stop Cooling / Etc. |
| M109 | Yes | Wait for Temp (Head) |
| M116 | No | Pause for All Temps |
| M140 | Yes | Set Temp (Bed) |
| M141 | Yes | Set Temp (Chamber) |
| M190 | Yes | Wait for Temp (Bed) |
| M191 | Yes | Wait for Temp (Chamber) |
5 Flow
| Controlling Material Flow | ||
|---|---|---|
| Code | Supported | Brief Description |
| G10 | No | Absolute E |
| G11 | No | Relative E |
| M82 | Yes | Absolute E-Values |
| M83 | Yes | Relative E-Values |
| M221 | Yes | Set Flow Rate |
| M229 | Yes | Use E Values |
| M721 | Yes | Set Unprime Values |
| M722 | Yes | Set Prime Values |
| M723 | Yes | Set Manual Flow |
| M728 | Yes | Set Motor Current Boost |
| M756 | Yes | Set Height for Flow |
6 Position
| Controlling Positin and Offsets | ||
|---|---|---|
| Code | Supported | Brief Description |
| G20 | Yes | Set Units to Inches |
| G21 | Yes | Set Units to Milimeters |
| G28 | Yes | Send X, Y to Physical Home |
| G53 | Yes | Clear Offsets |
| G54-59 | Yes | Set Offsets |
| G90 | Yes | Absolute Positioning |
| G91 | Yes | Relatative Positioning |
| G92 | Yes | Reset Coordinates |
| G93 | Yes | Reset Coordinates |
| M6 | Yes | Declare Head Offsets |
| M660 | Yes | Set Tool Offsets |
| M702-4 | Yes | Cloning Heads |
7 Lasers
| Controlling Lasers and UV Pens | ||
|---|---|---|
| Code | Supported | Brief Description |
| M620 | Yes | Enable Device |
| M621 | Yes | Set Laser Power |
| M623 | Yes | Duration Emit |
| Laser Examples | ||
| UV Pen Examples | ||
8 Spindles
| Controlling Spindles and Lathes | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
9 Reporting
| Reporting and Diagnostics | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
10 Aux Devices
| Controlling Aux Devices | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
11 Other
| Other Commands | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
