Difference between revisions of "Test4"
(→8 Spindles) |
(→11 Other) |
||
(2 intermediate revisions by the same user not shown) | |||
Line 290: | Line 290: | ||
! Brief Description | ! Brief Description | ||
|- | |- | ||
− | ! [[# | + | ! [[#M701_Set_Head_Reporting|M701]] |
− | | Yes || | + | | Yes || Set Head Reporting |
+ | |- | ||
+ | ! [[#M718_Stop_Logging_to_File|M718]] | ||
+ | | Yes || Stop Logging to File | ||
+ | |- | ||
+ | ! [[#M719_Start_Logging_to_File|M719]] | ||
+ | | Yes || Start Logging to File | ||
+ | |- | ||
+ | ! [[#M670_Enable_Y-arm_Light|M670]] | ||
+ | | Yes || Enable Y-arm Light | ||
+ | |- || Activate Danger Light | ||
+ | |- | ||
+ | ! [[#M672_Set_Y-arm_Light|M672]] | ||
+ | | Yes || Set Y-arm Light | ||
+ | |- | ||
+ | ! [[#M772_Reset_All_Metrics|M772]] | ||
+ | | Yes || Reset All Metrics | ||
+ | |- | ||
+ | ! [[#M773_Generate_Basic_Report|M773]] | ||
+ | | Yes || Generate Basic Report | ||
|- | |- | ||
|} | |} | ||
Line 303: | Line 322: | ||
<br> | <br> | ||
<br> | <br> | ||
− | |||
== 10 Aux Devices == | == 10 Aux Devices == | ||
Line 314: | Line 332: | ||
! Brief Description | ! Brief Description | ||
|- | |- | ||
− | ! [[# | + | ! [[#M7_Set_Power_On_Aux_1|M7]] |
− | | Yes || | + | | Yes || Aux 1 On (Mist) |
+ | |- | ||
+ | ! [[#M8_Set_Power_On_Aux_2|M8]] | ||
+ | | Yes || Aux 2 On (Flood) | ||
+ | |- | ||
+ | ! [[#M9_Turn_Off_All_Aux|M9]] | ||
+ | | Yes || All Aux Off | ||
+ | |- | ||
+ | ! [[#M620_Enable_Device|M620]] | ||
+ | | Yes || Enable Device | ||
+ | |- | ||
+ | ! [[#M670_Enable_Y-arm_Light|M670]] | ||
+ | | Yes || Enable Y-arm Light | ||
+ | |- | ||
+ | ! [[#M671_Activate_Danger_Lights|M671]] | ||
+ | | Yes || Activate Danger Light | ||
+ | |- | ||
+ | ! [[#M672_Set_Y-arm_Light|M672]] | ||
+ | | Yes || Set Y-arm Light | ||
+ | |- | ||
+ | ! [[#M675_Activate_Response_LEDs|M675]] | ||
+ | | Yes || Activate Response LEDs | ||
+ | |- | ||
+ | ! [[#M676_Activate_Recirc._Fan|M676]] | ||
+ | | Yes || Activate Recirc. Fan | ||
+ | |- | ||
+ | ! [[#M677_Activate_Buzzer|M677]] | ||
+ | | Yes || Activate Buzzer | ||
+ | |- | ||
+ | ! [[#M678_Activate_Laser_X-hair|M678]] | ||
+ | | Yes || Activate Laser X-hair | ||
+ | |- | ||
+ | ! [[#M679_Activate_Vacuum|M679]] | ||
+ | | Yes || Activate Vacuum | ||
+ | |- | ||
+ | ! [[#M684_Activate_Exhaust|M684]] | ||
+ | | Yes || Activate Exhaust | ||
+ | |- | ||
+ | ! [[#M685_Set_Power_on_Air|M685]] | ||
+ | | Yes || Activate Air | ||
+ | |- | ||
+ | ! [[#M689_Activate_Ext._Head|M689]] | ||
+ | | Yes || Activate Ext. Head | ||
|- | |- | ||
|} | |} | ||
Line 327: | Line 387: | ||
<br> | <br> | ||
<br> | <br> | ||
− | |||
== 11 Other == | == 11 Other == | ||
Line 338: | Line 397: | ||
! Brief Description | ! Brief Description | ||
|- | |- | ||
− | ! [[# | + | ! [[#M17_Engage_Motors|M17]] |
− | | Yes || | + | | Yes || Engage Motors |
+ | |- | ||
+ | ! [[#M18_Disengage_Motors|M18]] | ||
+ | | Yes || Disengage Motors | ||
+ | |- | ||
+ | ! [[#M30_End_of_Program|M30]] | ||
+ | | Yes || End of Program | ||
+ | |- | ||
+ | ! [[#M84_Disable_Motors|M84]] | ||
+ | | Yes || Disable Motors | ||
+ | |- | ||
+ | ! [[#M783_Tie_Aux_to_Extrusion|M783]] | ||
+ | | Yes || Tie Aux to Extrusion | ||
+ | |- | ||
+ | ! [[#M790_New_Layer_Actions|M790]] | ||
+ | | Yes || New Layer Actions | ||
+ | |- | ||
+ | ! [[#M791_Snap_Image|M791]] | ||
+ | | Yes || Snap Image | ||
+ | |- | ||
+ | ! [[#M792_Execute_Action|M792]] | ||
+ | | Yes || Execute Action | ||
|- | |- | ||
|} | |} |
Latest revision as of 17:17, 21 May 2020
Contents
3 Movement
Controlling Movement | ||
---|---|---|
Code | Supported | Brief Description |
G0 | Yes | Rapid Move |
G1 | Yes | Working Move |
G2 | Yes | Clockwise Arc |
G2.1 | Yes | Spiral CW Arc1 |
G2.2 | Yes | Spiral CW Arc2 |
G2.3 | Yes | 3-Space CW Spiral Arc |
G3 | Yes | Counterclockwise Arc |
G3.1 | Yes | Spiral CCW Arc1 |
G3.2 | Yes | Spiral CCW Arc2 |
G3.3 | Yes | 3-Space CCW Spiral Arc |
G4 | Yes | Timed Pause |
G16 | Yes | Arc in Any Plane |
G17 | Yes | Arc in XY Plane |
G18 | Yes | Arc in XZ Plane |
G19 | Yes | Arc in YZ Plane |
M0 | Yes | Stop Until Resume |
M203 | Yes | Set G0 Speed |
4 Temperature
Controlling Temperature | ||
---|---|---|
Code | Supported | Brief Description |
M104 | Yes | Set Temp (Head) |
M106 | Yes | Set Cooling / Etc. |
M107 | Yes | Stop Cooling / Etc. |
M109 | Yes | Wait for Temp (Head) |
M116 | No | Pause for All Temps |
M140 | Yes | Set Temp (Bed) |
M141 | Yes | Set Temp (Chamber) |
M190 | Yes | Wait for Temp (Bed) |
M191 | Yes | Wait for Temp (Chamber) |
5 Flow
Controlling Material Flow | ||
---|---|---|
Code | Supported | Brief Description |
G10 | No | Absolute E |
G11 | No | Relative E |
M82 | Yes | Absolute E-Values |
M83 | Yes | Relative E-Values |
M221 | Yes | Set Flow Rate |
M229 | Yes | Use E Values |
M721 | Yes | Set Unprime Values |
M722 | Yes | Set Prime Values |
M723 | Yes | Set Manual Flow |
M728 | Yes | Set Motor Current Boost |
M756 | Yes | Set Height for Flow |
6 Position
Controlling Positin and Offsets | ||
---|---|---|
Code | Supported | Brief Description |
G20 | Yes | Set Units to Inches |
G21 | Yes | Set Units to Milimeters |
G28 | Yes | Send X, Y to Physical Home |
G53 | Yes | Clear Offsets |
G54-59 | Yes | Set Offsets |
G90 | Yes | Absolute Positioning |
G91 | Yes | Relatative Positioning |
G92 | Yes | Reset Coordinates |
G93 | Yes | Reset Coordinates |
M6 | Yes | Declare Head Offsets |
M660 | Yes | Set Tool Offsets |
M702-4 | Yes | Cloning Heads |
7 Lasers
Controlling Lasers and UV Pens | ||
---|---|---|
Code | Supported | Brief Description |
M620 | Yes | Enable Device |
M621 | Yes | Set Laser Power |
M623 | Yes | Duration Emit |
Laser Examples | ||
UV Pen Examples |
8 Spindles
Controlling Spindles and Lathes | ||
---|---|---|
Code | Supported | Brief Description |
M3 | Yes | Spindle On CW |
M4 | Yes | Spindle On CCW |
M5 | Yes | Spindle Off |
M253 | Yes | Turn On Lathe (CW) |
M254 | Yes | Turn On Lathe (CCW) |
M255 | Yes | Turn Off Lathe |
G81 | G81 | Peck Drilling |
9 Reporting
Reporting and Diagnostics | ||
---|---|---|
Code | Supported | Brief Description |
M701 | Yes | Set Head Reporting |
M718 | Yes | Stop Logging to File |
M719 | Yes | Start Logging to File |
M670 | Yes | Enable Y-arm Light |
M672 | Yes | Set Y-arm Light |
M772 | Yes | Reset All Metrics |
M773 | Yes | Generate Basic Report |
10 Aux Devices
Controlling Aux Devices | ||
---|---|---|
Code | Supported | Brief Description |
M7 | Yes | Aux 1 On (Mist) |
M8 | Yes | Aux 2 On (Flood) |
M9 | Yes | All Aux Off |
M620 | Yes | Enable Device |
M670 | Yes | Enable Y-arm Light |
M671 | Yes | Activate Danger Light |
M672 | Yes | Set Y-arm Light |
M675 | Yes | Activate Response LEDs |
M676 | Yes | Activate Recirc. Fan |
M677 | Yes | Activate Buzzer |
M678 | Yes | Activate Laser X-hair |
M679 | Yes | Activate Vacuum |
M684 | Yes | Activate Exhaust |
M685 | Yes | Activate Air |
M689 | Yes | Activate Ext. Head |
11 Other
Other Commands | ||
---|---|---|
Code | Supported | Brief Description |
M17 | Yes | Engage Motors |
M18 | Yes | Disengage Motors |
M30 | Yes | End of Program |
M84 | Yes | Disable Motors |
M783 | Yes | Tie Aux to Extrusion |
M790 | Yes | New Layer Actions |
M791 | Yes | Snap Image |
M792 | Yes | Execute Action |