Difference between revisions of "Hydra 16A"
Line 23: | Line 23: | ||
Most technical specifications are detailed in the comparison chart on the main page. | Most technical specifications are detailed in the comparison chart on the main page. | ||
+ | |||
+ | === Adjustments === | ||
+ | * Speed of travel (at slicing or in g-code editor) | ||
+ | * Layer thickness (at slicing) | ||
+ | * Volume of flow per unit distance (at slicing or in g-code editor) | ||
+ | * Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25) | ||
+ | * Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1) | ||
+ | * HotBed Temperature (at slicing, in g-code editor, or manually during build) | ||
+ | |||
+ | ''Or, is tabular better?'' | ||
+ | |||
+ | {| border="1" class="wikitable" | ||
+ | |+ Adjustments | ||
+ | ! Metric | ||
+ | ! Units | ||
+ | ! During Slicing | ||
+ | ! In G-Code Editor | ||
+ | ! GUI During Build | ||
+ | |- | ||
+ | ! Speed of Travel | ||
+ | | mm/min || yes || yes || no | ||
+ | |- | ||
+ | ! Layer Thickness | ||
+ | | mm || yes || no || no | ||
+ | |- | ||
+ | ! Flow Rate | ||
+ | | nL/sec || yes || yes || yes | ||
+ | |- | ||
+ | ! Extruder Temperature | ||
+ | | °C || yes || yes || yes | ||
+ | |- | ||
+ | ! Fan Speed | ||
+ | | % of max || yes || yes || yes | ||
+ | |- | ||
+ | ! HotBed | ||
+ | | °C || yes || yes || yes | ||
+ | |- | ||
+ | |} |
Revision as of 12:07, 23 July 2018
Contents |
The Hydra 16A is our large format machine. Introduced in 2016, it features hard resolution (with encoder feedback) of 20 microns in the X and Y, and 0.8 microns in the Z in standard mode. In microstepping mode, we can achieve soft resolution of 4 microns in the X and Y. It comes standard with two tool positions, but can take additional yokes to handle more.
The base model has a range of 250mm in the Z, and can be equipped with the following (one is required):
- Bed, Standard, Warm: 400x300mm, 120C
- Bed, Standard, Hot: 400x300mm, 200C
- Bed, Large, Warm: 600x400mm, 120C
- Bed, Large, Hot: 600x444mm, 200C
In addition to the options available on most Hyrel printers, the Hydra 16A can also be equipped with:
- The 40 Watt CO2 laser (~10,000nm wavelength)
- The Pick-and-Place head with component tray
- The Three-Phase Spindle Tool for light machining operations
Most technical specifications are detailed in the comparison chart on the main page.
Adjustments
- Speed of travel (at slicing or in g-code editor)
- Layer thickness (at slicing)
- Volume of flow per unit distance (at slicing or in g-code editor)
- Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
- Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
- HotBed Temperature (at slicing, in g-code editor, or manually during build)
Or, is tabular better?
Metric | Units | During Slicing | In G-Code Editor | GUI During Build |
---|---|---|---|---|
Speed of Travel | mm/min | yes | yes | no |
Layer Thickness | mm | yes | no | no |
Flow Rate | nL/sec | yes | yes | yes |
Extruder Temperature | °C | yes | yes | yes |
Fan Speed | % of max | yes | yes | yes |
HotBed | °C | yes | yes | yes |