Difference between revisions of "Reservoir Heads"
(→Settings for Cold and Warm Flow Heads) |
(→PLASTIC Reservoir Heads) |
||
(48 intermediate revisions by the same user not shown) | |||
Line 70: | Line 70: | ||
<gallery> | <gallery> | ||
File:VOL-25.png|[[VOL]]-25 | File:VOL-25.png|[[VOL]]-25 | ||
− | File:VCD-25.png|[[ | + | File:VCD-25.png|[[VOL]]-25 with COD |
File:KRA-15.png|[[KRA]]-15 | File:KRA-15.png|[[KRA]]-15 | ||
− | File:KCD-15.png|[[ | + | File:KCD-15.png|[[KRA]]-15 with COD |
</gallery> | </gallery> | ||
− | * [[File:Yt.png]] [https://www.youtube.com/watch?v=ktK256u0sN8 Overview of the EMO | + | * [[File:Yt.png]] [https://www.youtube.com/watch?v=ktK256u0sN8 Overview of the EMO Heads] |
− | + | * [[File:Yt.png]] [https://www.youtube.com/watch?v=h95IurET7UM Overview of the SDS Heads] | |
− | * [[File:Yt.png]] [https://www.youtube.com/watch?v=h95IurET7UM Overview of the SDS | + | * [[File:Yt.png]] [https://www.youtube.com/watch?v=9_onCKhT_dg Overview of the VOL Heads] |
− | + | * [[File:Yt.png]] [https://www.youtube.com/watch?v=QD2FrZ4kg1g Overview of the KRA Heads] | |
− | * [[File:Yt.png]] [https://www.youtube.com/watch?v=9_onCKhT_dg Overview of the VOL | ||
− | |||
− | * [[File:Yt.png]] [https://www.youtube.com/watch?v=QD2FrZ4kg1g Overview of the KRA | ||
− | |||
* [[File:Yt.png]] [https://www.youtube.com/watch?v=DQj6oLfrbLo Overview of the SMH-2 Head] | * [[File:Yt.png]] [https://www.youtube.com/watch?v=DQj6oLfrbLo Overview of the SMH-2 Head] | ||
+ | * Please see our [[Data Sheets]] as well. | ||
{| border="1" class="wikitable" style="text-align: center; width: 85%;" | {| border="1" class="wikitable" style="text-align: center; width: 85%;" | ||
|+ EMO-Type Head Comparison | |+ EMO-Type Head Comparison | ||
! style="width: 10%;" | Temperature > | ! style="width: 10%;" | Temperature > | ||
− | ! style="width: 10%;" | Down to | + | ! style="width: 10%;" | Down to 0°C > |
! style="width: 10%;" | Ambient | ! style="width: 10%;" | Ambient | ||
! style="width: 10%;" | Up to 75°C | ! style="width: 10%;" | Up to 75°C | ||
! style="width: 10%;" | Up to 100°C | ! style="width: 10%;" | Up to 100°C | ||
− | |||
! style="width: 10%;" | Up to 180°C | ! style="width: 10%;" | Up to 180°C | ||
! style="width: 10%;" | Up to 250°C | ! style="width: 10%;" | Up to 250°C | ||
|- | |- | ||
− | ! | + | ! Crosslinking <br> Optional |
| [[RSD]]-30 | | [[RSD]]-30 | ||
| [[EMO]]-25 <br> [[SDS]]-5, -10, <br> [[SDS]]-30, -60 <br> SMH-2 | | [[EMO]]-25 <br> [[SDS]]-5, -10, <br> [[SDS]]-30, -60 <br> SMH-2 | ||
− | | [[HSD]]-30 | + | | [[HSD]]-30 <br> [[VOL]]-25 |
| [[HSD]]-10 | | [[HSD]]-10 | ||
− | |||
| [[KRA]]-15 <br> [[KR2]]-15 | | [[KRA]]-15 <br> [[KR2]]-15 | ||
| [[TAM]]-15 | | [[TAM]]-15 | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} | ||
+ | Note, RSD-30 will take you about 20C below ambient. | ||
So, what do these goofy designations actually stand for? | So, what do these goofy designations actually stand for? | ||
Line 120: | Line 107: | ||
:[[COD]]: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity | :[[COD]]: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity | ||
:[[VOL]]: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity | :[[VOL]]: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity | ||
− | |||
− | |||
− | |||
:[[KR2]]: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity | :[[KR2]]: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity | ||
− | |||
:[[TAM]]: Tambora: Heated (up to 300°C) Emulsifiables - High Viscosity | :[[TAM]]: Tambora: Heated (up to 300°C) Emulsifiables - High Viscosity | ||
− | |||
:[[SDS]]: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity | :[[SDS]]: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity | ||
− | |||
:[[HSD]]: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity | :[[HSD]]: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity | ||
:[[RSD]]: Refrigerated Syringe Dispensing System - Low to Medium Viscosity | :[[RSD]]: Refrigerated Syringe Dispensing System - Low to Medium Viscosity | ||
− | |||
− | |||
:[[DSD]]: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity | :[[DSD]]: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity | ||
:[[SMH]]: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity | :[[SMH]]: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity | ||
Line 159: | Line 138: | ||
== Settings for Cold and Warm Flow Heads == | == Settings for Cold and Warm Flow Heads == | ||
− | Non-Hydra units shipping through spring 2017 ship with Repetrel version 2.x. Hydra units, and other units shipping as of summer 2017 will have version 3.x, and should consult the version 3.x tables, below. All units should be upgraded to 3.x when it is available. If you run a head with v2 settings on a v3 install, the background will flash red; please make the | + | Non-Hydra units shipping through spring 2017 ship with Repetrel version 2.x. Hydra units, and other units shipping as of summer 2017 will have version 3.x, and should consult the version 3.x tables, below. All units should be upgraded to 3.x when it is available. If you run a head with v2 settings on a v3 install, the background will flash red; please make the changes below: |
{| class="wikitable" style="text-align: center;" | {| class="wikitable" style="text-align: center;" | ||
Line 176: | Line 155: | ||
|+ Settings for Cold and Warm Flow Heads with METAL Reservoirs | |+ Settings for Cold and Warm Flow Heads with METAL Reservoirs | ||
! rowspan="2" style="width: 15%" | Settings | ! rowspan="2" style="width: 15%" | Settings | ||
− | ! colspan="5" | [[EMO]], [[VOL]], [[KRA]], [[COD]], [[VCD]], [[KCD]] Heads ''and New [[KR2]]''<br> (17mm Tubes, Various Gear Ratios) | + | ! colspan="5" | [[EMO]], [[VOL]], [[KRA]], [[COD]], [[VCD]], [[KCD]] Heads ''and New [[KR2]] and [[TAM]]''<br> (17mm Tubes, Various Gear Ratios) |
|- | |- | ||
! style="width: 10%" | 19:1 Ratio | ! style="width: 10%" | 19:1 Ratio | ||
! style="width: 10%" | 27:1 Ratio | ! style="width: 10%" | 27:1 Ratio | ||
! style="width: 10%" | 51:1 Ratio | ! style="width: 10%" | 51:1 Ratio | ||
− | ! style="width: 10%" | 100:1 KRA | + | ! style="width: 10%" | 100:1 KRA<br> & EMO-XT |
− | ! style="width: 10%" | 100:1 KR2 | + | ! style="width: 10%" | 100:1 KR2, TAM |
|- | |- | ||
!colspan="6"| Material | !colspan="6"| Material | ||
Line 238: | Line 217: | ||
|- | |- | ||
! Maximum | ! Maximum | ||
− | | 0 | + | | 0 |
− | | 0/ | + | | 0/80 |
− | | 0/ | + | | 0/80 |
− | | 0/ | + | | 0/80/150 |
− | | 0/ | + | | 0/80/150/250 |
|- | |- | ||
!colspan="6"| Overrides | !colspan="6"| Overrides | ||
Line 255: | Line 234: | ||
! style="background-color: powderblue;" | <span style="color: blue;">'''''Pulses: v3.x (~1μl)'''''</span> | ! style="background-color: powderblue;" | <span style="color: blue;">'''''Pulses: v3.x (~1μl)'''''</span> | ||
| style="background-color: powderblue;" | <span style="color: blue;">'''''176'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''176'''''</span> | ||
− | | style="background-color: powderblue;" | <span style="color: blue;">''''' | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''275'''''</span> |
| style="background-color: powderblue;" | <span style="color: blue;">'''''517'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''517'''''</span> | ||
| style="background-color: powderblue;" | <span style="color: blue;">'''''1000'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''1000'''''</span> | ||
− | | style="background-color: powderblue;" | <span style="color: blue;">''''' | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''600'''''</span> |
|- | |- | ||
! rowspan="2" | Feed Rate % | ! rowspan="2" | Feed Rate % | ||
Line 272: | Line 251: | ||
|- | |- | ||
! Steps | ! Steps | ||
− | | | + | | 7000 |
− | | | + | | 6000 |
| 1000 | | 1000 | ||
| 3000 | | 3000 | ||
Line 286: | Line 265: | ||
|- | |- | ||
! Dwell Time (ms) | ! Dwell Time (ms) | ||
− | | | + | | 600 |
− | | | + | | 500 |
| 100 | | 100 | ||
| 300 | | 300 | ||
| 600 | | 600 | ||
− | |- | + | |- |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|colspan="6"| '''Unprime''' <br> ''Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.'' | |colspan="6"| '''Unprime''' <br> ''Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.'' | ||
|- | |- | ||
! Steps | ! Steps | ||
− | | | + | | 7000 |
− | | | + | | 6000 |
− | | | + | | 1000 |
− | | | + | | 3000 |
− | | | + | | 6000 |
|- | |- | ||
! Rate | ! Rate | ||
Line 316: | Line 288: | ||
|- | |- | ||
! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span> | ! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span> | ||
− | | style="background-color: pink;" | <span style="color: maroon;">''''' | + | | style="background-color: pink;" | <span style="color: maroon;">'''''600'''''</span> |
− | | style="background-color: pink;" | <span style="color: maroon;">''''' | + | | style="background-color: pink;" | <span style="color: maroon;">'''''500'''''</span> |
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span> | | style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span> | ||
| style="background-color: pink;" | <span style="color: maroon;">'''''250'''''</span> | | style="background-color: pink;" | <span style="color: maroon;">'''''250'''''</span> | ||
Line 323: | Line 295: | ||
|- | |- | ||
! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span> | ! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span> | ||
− | | style="background-color: powderblue;" | <span style="color: blue;">'''''- | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''-600'''''</span> |
− | | style="background-color: powderblue;" | <span style="color: blue;">'''''- | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''-500'''''</span> |
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span> | ||
| style="background-color: powderblue;" | <span style="color: blue;">'''''-250'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''-250'''''</span> | ||
| style="background-color: powderblue;" | <span style="color: blue;">'''''-500'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''-500'''''</span> | ||
|- | |- | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
!colspan="6"| Offsets | !colspan="6"| Offsets | ||
|- | |- | ||
Line 381: | Line 346: | ||
| 1k PLAT_RTD | | 1k PLAT_RTD | ||
| 1k PLAT_RTD | | 1k PLAT_RTD | ||
− | |- | + | |- |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
! rowspan="2" style="width: 15%" | Settings | ! rowspan="2" style="width: 15%" | Settings | ||
! style="width: 10%" | 19:1 Ratio | ! style="width: 10%" | 19:1 Ratio | ||
! style="width: 10%" | 27:1 Ratio | ! style="width: 10%" | 27:1 Ratio | ||
! style="width: 10%" | 51:1 Ratio | ! style="width: 10%" | 51:1 Ratio | ||
− | ! style="width: 10%" | 100:1 | + | ! style="width: 10%" | 100:1 KRA<br> & EMO-XT |
− | ! style="width: 10%" | 100:1 KR2 | + | ! style="width: 10%" | 100:1 KR2, TAM |
|- | |- | ||
− | ! colspan="5" | [[EMO]], [[VOL]], [[KRA]], [[COD]], [[VCD]], [[KCD]] Heads ''and New [[KR2]]''<br> (17mm Tubes, Various Gear Ratios) | + | ! colspan="5" | [[EMO]], [[VOL]], [[KRA]], [[COD]], [[VCD]], [[KCD]] Heads ''and New [[KR2]] and [[TAM]]''<br> (17mm Tubes, Various Gear Ratios) |
|- | |- | ||
|} | |} | ||
Line 411: | Line 362: | ||
{| class="wikitable" style="text-align: center;" | {| class="wikitable" style="text-align: center;" | ||
|+ Settings for Cold and Warm Flow Heads with PLASTIC Reservoirs | |+ Settings for Cold and Warm Flow Heads with PLASTIC Reservoirs | ||
− | ! rowspan="2" style="width: | + | ! rowspan="2" style="width: 9%" | Settings |
− | ! colspan=" | + | ! colspan="6" | [[SDS]], [[HSD]], and [[RSD]] Heads (with or without COD)<br> (Various Tube Diameters, Standard Gear Ratios) |
! colspan="1" | [[DSD-50]] (1:1) | ! colspan="1" | [[DSD-50]] (1:1) | ||
+ | ! colspan="3" | Special (with or without COD) | ||
|- | |- | ||
− | ! style="width: | + | ! style="width: 9%" | 1cc ET |
− | ! style="width: | + | ! style="width: 9%" | 5cc |
− | ! style="width: | + | ! style="width: 9%" | 10cc |
− | ! style="width: | + | ! style="width: 9%" | 30cc |
− | ! style="width: | + | ! style="width: 9%" | 60cc |
− | ! style="width: | + | ! style="width: 9%" | 150cc |
+ | ! style="width: 9%" | DSD-50 | ||
+ | ! style="width: 9%" | [[HSD-10-Ardes]] | ||
+ | ! style="width: 9%" | [[SDS-30XT]] | ||
+ | ! style="width: 9%" | [[SDS-60XT]] | ||
|- | |- | ||
− | !colspan=" | + | !colspan="11"| Material |
|- | |- | ||
! Type | ! Type | ||
+ | | Custom | ||
+ | | Custom | ||
+ | | Custom | ||
+ | | Custom | ||
| Custom | | Custom | ||
| Custom | | Custom | ||
Line 435: | Line 395: | ||
| (any) | | (any) | ||
| (any) | | (any) | ||
+ | | (any) | ||
+ | | (any) | ||
| (any) | | (any) | ||
| (any) | | (any) | ||
| (any) | | (any) | ||
| (any) | | (any) | ||
+ | | (any) | ||
+ | | (any) | ||
|- | |- | ||
! Nozzle | ! Nozzle | ||
Line 445: | Line 409: | ||
| 1.600 | | 1.600 | ||
| 1.600 | | 1.600 | ||
+ | | 1.600 | ||
+ | | 4.00 | ||
| 1.600 | | 1.600 | ||
| 1.600 | | 1.600 | ||
+ | | 1.600 | ||
+ | | 1.6000 | ||
|- | |- | ||
! Layer | ! Layer | ||
Line 454: | Line 422: | ||
| 0.300 | | 0.300 | ||
| 0.300 | | 0.300 | ||
+ | | 0.300 | ||
+ | | 0.300 | ||
+ | | 0.300 | ||
+ | | 0.300 | ||
| 0.300 | | 0.300 | ||
|- | |- | ||
− | !colspan=" | + | !colspan="10"| Temp Info |
|- | |- | ||
! Print Temp | ! Print Temp | ||
Line 462: | Line 434: | ||
| 0 | | 0 | ||
| 0 | | 0 | ||
− | | 0 | + | | 0 |
+ | | 0 | ||
+ | | 0 | ||
+ | | 0 | ||
+ | | 35 | ||
| 0 | | 0 | ||
| 0 | | 0 | ||
|- | |- | ||
! Power Factor | ! Power Factor | ||
+ | | 100 | ||
+ | | 100 | ||
+ | | 100 | ||
+ | | 100 | ||
| 100 | | 100 | ||
| 100 | | 100 | ||
Line 475: | Line 455: | ||
|- | |- | ||
! Minimum | ! Minimum | ||
+ | | 0 | ||
+ | | 0 | ||
+ | | 0 | ||
+ | | 0 | ||
| 0 | | 0 | ||
| 0 | | 0 | ||
Line 487: | Line 471: | ||
| 0 | | 0 | ||
| 0* <br> *75 for HSD | | 0* <br> *75 for HSD | ||
+ | | 0 | ||
+ | | 0 | ||
+ | | 0 | ||
+ | | 130 | ||
| 0 | | 0 | ||
| 0 | | 0 | ||
|- | |- | ||
− | !colspan=" | + | !colspan="11"| Overrides |
|- | |- | ||
! style="background-color: pink;" | <span style="color: maroon;">'''''Pulses: v2.x (~10nl)'''''</span> | ! style="background-color: pink;" | <span style="color: maroon;">'''''Pulses: v2.x (~10nl)'''''</span> | ||
Line 498: | Line 486: | ||
| style="background-color: pink;" | <span style="color: maroon;">'''''0.225'''''</span> | | style="background-color: pink;" | <span style="color: maroon;">'''''0.225'''''</span> | ||
| style="background-color: pink;" | <span style="color: maroon;">'''''0.15'''''</span> | | style="background-color: pink;" | <span style="color: maroon;">'''''0.15'''''</span> | ||
+ | | style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span> | ||
| style="background-color: pink;" | <span style="color: maroon;">'''''0.135'''''</span> | | style="background-color: pink;" | <span style="color: maroon;">'''''0.135'''''</span> | ||
+ | | style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span> | ||
+ | | style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span> | ||
+ | | style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span> | ||
|- | |- | ||
− | ! style="background-color: powderblue;" | <span style="color: blue;">'''''Pulses: v3.x (~ | + | ! style="background-color: powderblue;" | <span style="color: blue;">'''''Pulses: v3.x (~1µl)'''''</span> |
| style="background-color: powderblue;" | <span style="color: blue;">'''''610'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''610'''''</span> | ||
| style="background-color: powderblue;" | <span style="color: blue;">'''''81'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''81'''''</span> | ||
Line 506: | Line 498: | ||
| style="background-color: powderblue;" | <span style="color: blue;">'''''30'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''30'''''</span> | ||
| style="background-color: powderblue;" | <span style="color: blue;">'''''20'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''20'''''</span> | ||
− | | style="background-color: powderblue;" | <span style="color: blue;">''''' | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''22'''''</span> |
+ | | style="background-color: powderblue;" | <span style="color: blue;">'''''20'''''</span> | ||
+ | | style="background-color: powderblue;" | <span style="color: blue;">'''''900'''''</span> | ||
+ | | style="background-color: powderblue;" | <span style="color: blue;">'''''86'''''</span> | ||
+ | | style="background-color: powderblue;" | <span style="color: blue;">'''''25'''''</span> | ||
|- | |- | ||
− | ! Feed Rate % | + | ! rowspan="2" | Feed Rate % |
− | | 1.000 | + | | rowspan="2" | 1.000 |
− | | 1.000 | + | | rowspan="2" | 1.000 |
− | | 1.000 | + | | rowspan="2" | 1.000 |
− | | 1.000 | + | | rowspan="2" | 1.000 |
− | | 1.000 | + | | rowspan="2" | 1.000 |
− | | 1.000 | + | | rowspan="2" | 1.000 |
+ | | rowspan="2" | 1.000 | ||
+ | | style="background-color: pink;" | <span style="color: maroon;">1.000</span> | ||
+ | | rowspan="2" | 1.000 | ||
+ | | rowspan="2" | 1.000 | ||
|- | |- | ||
− | |colspan=" | + | | style="background-color: powderblue;" | <span style="color: blue;">2.000</span> |
+ | |- | ||
+ | |colspan="11"| '''Prime''' <br> ''Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.'' | ||
|- | |- | ||
! Steps | ! Steps | ||
− | | | + | | 7500 |
− | | | + | | 1500 |
− | | | + | | 3000 |
− | | | + | | 2250 |
− | | | + | | 1500 |
+ | | 1500 | ||
| 1 | | 1 | ||
+ | | 9000 | ||
+ | | 1125 | ||
+ | | 1500 | ||
|- | |- | ||
! Rate | ! Rate | ||
Line 530: | Line 536: | ||
| 10,000 | | 10,000 | ||
| 10,000 | | 10,000 | ||
+ | | 10,000 | ||
+ | | 10,000 | ||
+ | | 10,000 | ||
+ | | 10,000 | ||
| 10,000 | | 10,000 | ||
| 10,000 | | 10,000 | ||
Line 535: | Line 545: | ||
|- | |- | ||
! Dwell Time (ms) | ! Dwell Time (ms) | ||
+ | | 800 | ||
+ | | 150 | ||
+ | | 300 | ||
+ | | 300 | ||
+ | | 300 | ||
+ | | 300 | ||
| 100 | | 100 | ||
− | | | + | | 900 |
− | | | + | | 300 |
− | | | + | | 300 |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | |colspan=" | + | |colspan="11"| '''Unprime''' <br> ''Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.'' |
|- | |- | ||
! Steps | ! Steps | ||
− | | | + | | 7500 |
− | | | + | | 1500 |
− | | | + | | 3000 |
− | | | + | | 2250 |
− | | | + | | 1500 |
+ | | 1500 | ||
| 1 | | 1 | ||
+ | | 9000 | ||
+ | | 1125 | ||
+ | | 1500 | ||
|- | |- | ||
! Rate | ! Rate | ||
Line 564: | Line 574: | ||
| 10,000 | | 10,000 | ||
| 10,000 | | 10,000 | ||
+ | | 10,000 | ||
+ | | 10,000 | ||
| 10,000 | | 10,000 | ||
| 10,000 | | 10,000 | ||
+ | | 10,000 | ||
+ | | 10,000 | ||
| 10,000 | | 10,000 | ||
|- | |- | ||
! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span> | ! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span> | ||
− | | style="background-color: pink;" | <span style="color: maroon;">''''' | + | | style="background-color: pink;" | <span style="color: maroon;">'''''800'''''</span> |
− | | style="background-color: pink;" | <span style="color: maroon;">''''' | + | | style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span> |
− | | style="background-color: pink;" | <span style="color: maroon;">''''' | + | | style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span> |
− | | style="background-color: pink;" | <span style="color: maroon;">''''' | + | | style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span> |
− | | style="background-color: pink;" | <span style="color: maroon;">''''' | + | | style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span> |
+ | | style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span> | ||
| style="background-color: pink;" | <span style="color: maroon;">'''''1'''''</span> | | style="background-color: pink;" | <span style="color: maroon;">'''''1'''''</span> | ||
+ | | style="background-color: pink;" | <span style="color: maroon;">'''''900'''''</span> | ||
+ | | style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span> | ||
+ | | style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span> | ||
|- | |- | ||
! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span> | ! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span> | ||
− | | style="background-color: powderblue;" | <span style="color: blue;">'''''- | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''-800'''''</span> |
− | | style="background-color: powderblue;" | <span style="color: blue;">'''''- | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''-150'''''</span> |
− | | style="background-color: powderblue;" | <span style="color: blue;">'''''- | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span> |
− | | style="background-color: powderblue;" | <span style="color: blue;">'''''- | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span> |
− | | style="background-color: powderblue;" | <span style="color: blue;">'''''- | + | | style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span> |
+ | | style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span> | ||
| style="background-color: powderblue;" | <span style="color: blue;">'''''-1'''''</span> | | style="background-color: powderblue;" | <span style="color: blue;">'''''-1'''''</span> | ||
+ | | style="background-color: powderblue;" | <span style="color: blue;">'''''-900'''''</span> | ||
+ | | style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span> | ||
+ | | style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span> | ||
|- | |- | ||
− | + | !colspan="11"| Offsets | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | !colspan=" | ||
|- | |- | ||
! Clone Head | ! Clone Head | ||
Line 598: | Line 612: | ||
| Off | | Off | ||
| Off | | Off | ||
+ | | Off | ||
+ | | Off | ||
+ | | Off | ||
+ | | Off | ||
| Off | | Off | ||
| Off | | Off | ||
Line 605: | Line 623: | ||
| 0,000 | | 0,000 | ||
| 0,000 | | 0,000 | ||
+ | | 0,000 | ||
| 0,000 | | 0,000 | ||
| 0,000 | | 0,000 | ||
+ | | 0,000 | ||
+ | | 0,000 | ||
+ | | 0,000 | ||
| 0,000 | | 0,000 | ||
| 0,000 | | 0,000 | ||
Line 614: | Line 636: | ||
| 0,000 | | 0,000 | ||
| 0,000 | | 0,000 | ||
+ | | 0,000 | ||
+ | | 0,000 | ||
+ | | 0,000 | ||
+ | | 0,000 | ||
| 0,000 | | 0,000 | ||
| 0,000 | | 0,000 | ||
Line 621: | Line 647: | ||
| 0,000 | | 0,000 | ||
| 0,000 | | 0,000 | ||
+ | | 0,000 | ||
+ | | 0,000 | ||
+ | | 0,000 | ||
| 0,000 | | 0,000 | ||
| 0,000 | | 0,000 | ||
+ | | 0,000 | ||
| 0,000 | | 0,000 | ||
| 0,000 | | 0,000 | ||
|- | |- | ||
− | !colspan=" | + | !colspan="11"| Head Info |
|- | |- | ||
! Model | ! Model | ||
+ | | (varies) | ||
| (varies) | | (varies) | ||
| (varies) | | (varies) | ||
| (varies) | | (varies) | ||
| (varies) | | (varies) | ||
+ | | (varies) | ||
+ | | (varies) | ||
+ | | (varies) | ||
| (varies) | | (varies) | ||
| (varies) | | (varies) | ||
|- | |- | ||
! RTD Type | ! RTD Type | ||
+ | | None | ||
+ | | None | ||
+ | | None | ||
+ | | None* <br>''*1k PLAT RTD<br>for HSD, RSD'' | ||
+ | | None | ||
+ | | None | ||
+ | | None | ||
| 1k PLAT_RTD | | 1k PLAT_RTD | ||
− | | | + | | None |
− | | | + | | None |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | ! rowspan="2" style="width: | + | ! rowspan="2" style="width: 9%" | Settings |
− | ! style="width: | + | ! style="width: 9%" | 1cc ET |
− | ! style="width: | + | ! style="width: 9%" | 5cc |
− | ! style="width: | + | ! style="width: 9%" | 10cc |
− | ! style="width: | + | ! style="width: 9%" | 30cc |
− | ! style="width: | + | ! style="width: 9%" | 60cc |
− | ! style="width: | + | ! style="width: 9%" | 150cc |
+ | ! style="width: 9%" | DSD-50 | ||
+ | ! style="width: 9%" | [[HSD-10-Ardes]] | ||
+ | ! style="width: 9%" | [[SDS-30XT]] | ||
+ | ! style="width: 9%" | [[SDS-60XT]] | ||
|- | |- | ||
− | ! colspan=" | + | ! colspan="6" | [[SDS]], [[HSD]], and [[RSD]] Heads (with or without COD)<br> (Various Tube Diameters, Standard Gear Ratios) |
! colspan="1" | [[DSD]]-50 (1:1) | ! colspan="1" | [[DSD]]-50 (1:1) | ||
+ | ! colspan="3" | Special (with or without COD) | ||
|- | |- | ||
|} | |} |
Revision as of 13:36, 12 June 2019
Cold Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at room temperature, with or without UV Crosslinking.
Warm Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at elevated temperatures, with or without UV Crosslinking.
Materials for Cold and Warm Flow
Cold and Warm Flow heads are for printing as follows:
- With pastes, gels, emulsifiables or waxes.
- At room or elevated temperatures.
- With or without UV Crosslining.
- With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.
The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips.
- 3P Quick Cure Clay
- Adhesives
- Clay, Generic
- Epoxy, Two-part
- Fimo
- Glue
- Kato
- Metal Clay, including Precious Metal Clay (PMC)
- Modeling Clay
- PEG PolyEthylene Glycol
- Porcelain
- Plasticine
- Play-Doh
- Resins
- RTV Silicone
- Sculpey
- Sugru
The following materials can be printed from Warm Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips, or may print more easily at higher temperatures.
Heads for Cold and Warm Flow
Cold Flow is available through the following heads:
Warm Flow is available through the following heads:
- Overview of the EMO Heads
- Overview of the SDS Heads
- Overview of the VOL Heads
- Overview of the KRA Heads
- Overview of the SMH-2 Head
- Please see our Data Sheets as well.
Temperature > | Down to 0°C > | Ambient | Up to 75°C | Up to 100°C | Up to 180°C | Up to 250°C |
---|---|---|---|---|---|---|
Crosslinking Optional |
RSD-30 | EMO-25 SDS-5, -10, SDS-30, -60 SMH-2 |
HSD-30 VOL-25 |
HSD-10 | KRA-15 KR2-15 |
TAM-15 |
Note, RSD-30 will take you about 20C below ambient.
So, what do these goofy designations actually stand for?
- EMO: Emulsifiables at Room Temperature - Low to Medium Viscosity
- COD: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity
- VOL: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity
- KR2: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity
- TAM: Tambora: Heated (up to 300°C) Emulsifiables - High Viscosity
- SDS: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity
- HSD: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity
- RSD: Refrigerated Syringe Dispensing System - Low to Medium Viscosity
- DSD: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity
- SMH: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity
As of May, 2018, for S30 and ESR, the latest firmware is 32V, included with Repetrel 2.865; for EHR and Hydras, the latest firmware is the same, with Repetrel 3.075_A.
Research Papers Citing Hyrel Cold and Warm Flow
These are now listed by year here.
Firmware Versions for Cold and Warm Flow Heads
As of May, 2018, the following versions should be used for Repetrel versions 2.x and 3.x:
Use _TUBES_35K.hex :
- For all emulsion heads performing prime/unprime actions.
- For all emulsion heads with COD LED activity on constantly.
Use _TUBES_49V.hex :
- For all emulsion heads using Clench Valves instead of prime/unprime actions.
- For all emulsion heads using COD LED activity tied to printing moves only.
Use _FIL_250_PLAT_1A.hex :
- For heated emulsions heads which don't seem to reach max temperature.
Settings for Cold and Warm Flow Heads
Non-Hydra units shipping through spring 2017 ship with Repetrel version 2.x. Hydra units, and other units shipping as of summer 2017 will have version 3.x, and should consult the version 3.x tables, below. All units should be upgraded to 3.x when it is available. If you run a head with v2 settings on a v3 install, the background will flash red; please make the changes below:
Values for version 2.x will be inicated in this manner. |
---|
Values for version 3.x will be inicated in this manner. |
Note that you must flash these settings to the head to make them the new default.
Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings.
METAL Reservoir Heads
Settings | EMO, VOL, KRA, COD, VCD, KCD Heads and New KR2 and TAM (17mm Tubes, Various Gear Ratios) | ||||
---|---|---|---|---|---|
19:1 Ratio | 27:1 Ratio | 51:1 Ratio | 100:1 KRA & EMO-XT |
100:1 KR2, TAM | |
Material | |||||
Type | Custom | Custom | Custom | Custom | Custom |
Color | (any) | (any) | (any) | (any) | (any) |
Nozzle | 1.600 | 1.600 | 1.600 | 1.600 | 1.600 |
Layer | 0.300 | 0.300 | 0.300 | 0.300 | 0.300 |
Temp Info | |||||
Print Temp | 35 | 35 | 35 | 35 | 35 |
Power Factor | 100 | 100 | 100 | 100 | 100 |
Minimum | 0 | 0 | 0 | 0 | 0 |
Maximum | 0 | 0/80 | 0/80 | 0/80/150 | 0/80/150/250 |
Overrides | |||||
Pulses: v2.x (~10nl) | 1.6 | 2.3 | 4.7 | 9.0 | 15.0 |
Pulses: v3.x (~1μl) | 176 | 275 | 517 | 1000 | 600 |
Feed Rate % | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 |
2.000 | |||||
Prime Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material. | |||||
Steps | 7000 | 6000 | 1000 | 3000 | 6000 |
Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
Dwell Time (ms) | 600 | 500 | 100 | 300 | 600 |
Unprime Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material. | |||||
Steps | 7000 | 6000 | 1000 | 3000 | 6000 |
Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
Dwell Time (ms): v2.x | 600 | 500 | 100 | 250 | 500 |
Dwell Time (ms): v3.x | -600 | -500 | -100 | -250 | -500 |
Offsets | |||||
Clone Head | Off | Off | Off | Off | Off |
X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Head Info | |||||
Model | (varies) | (varies) | (varies) | (varies) | (varies) |
RTD Type | 1k PLAT_RTD | 1k PLAT_RTD | 1k PLAT_RTD | 1k PLAT_RTD | 1k PLAT_RTD |
Settings | 19:1 Ratio | 27:1 Ratio | 51:1 Ratio | 100:1 KRA & EMO-XT |
100:1 KR2, TAM |
EMO, VOL, KRA, COD, VCD, KCD Heads and New KR2 and TAM (17mm Tubes, Various Gear Ratios) |
PLASTIC Reservoir Heads
Settings | SDS, HSD, and RSD Heads (with or without COD) (Various Tube Diameters, Standard Gear Ratios) |
DSD-50 (1:1) | Special (with or without COD) | |||||||
---|---|---|---|---|---|---|---|---|---|---|
1cc ET | 5cc | 10cc | 30cc | 60cc | 150cc | DSD-50 | HSD-10-Ardes | SDS-30XT | SDS-60XT | |
Material | ||||||||||
Type | Custom | Custom | Custom | Custom | Custom | Custom | Custom | Custom | Custom | Custom |
Color | (any) | (any) | (any) | (any) | (any) | (any) | (any) | (any) | (any) | (any) |
Nozzle | 1.600 | 1.600 | 1.600 | 1.600 | 1.600 | 4.00 | 1.600 | 1.600 | 1.600 | 1.6000 |
Layer | 0.300 | 0.300 | 0.300 | 0.300 | 0.300 | 0.300 | 0.300 | 0.300 | 0.300 | 0.300 |
Temp Info | ||||||||||
Print Temp | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 35 | 0 | 0 |
Power Factor | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
Minimum | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Maximum | 0 | 0 | 0 | 0* *75 for HSD |
0 | 0 | 0 | 130 | 0 | 0 |
Overrides | ||||||||||
Pulses: v2.x (~10nl) | 5.80 | 0.75 | 0.58 | 0.225 | 0.15 | ? | 0.135 | ? | ? | ? |
Pulses: v3.x (~1µl) | 610 | 81 | 62.5 | 30 | 20 | 22 | 20 | 900 | 86 | 25 |
Feed Rate % | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 |
2.000 | ||||||||||
Prime Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material. | ||||||||||
Steps | 7500 | 1500 | 3000 | 2250 | 1500 | 1500 | 1 | 9000 | 1125 | 1500 |
Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
Dwell Time (ms) | 800 | 150 | 300 | 300 | 300 | 300 | 100 | 900 | 300 | 300 |
Unprime Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material. | ||||||||||
Steps | 7500 | 1500 | 3000 | 2250 | 1500 | 1500 | 1 | 9000 | 1125 | 1500 |
Rate | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 | 10,000 |
Dwell Time (ms): v2.x | 800 | 300 | 300 | 300 | 300 | 300 | 1 | 900 | 300 | 300 |
Dwell Time (ms): v3.x | -800 | -150 | -300 | -300 | -300 | -300 | -1 | -900 | -300 | -300 |
Offsets | ||||||||||
Clone Head | Off | Off | Off | Off | Off | Off | Off | Off | Off | Off |
X | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Y | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Z | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 | 0,000 |
Head Info | ||||||||||
Model | (varies) | (varies) | (varies) | (varies) | (varies) | (varies) | (varies) | (varies) | (varies) | (varies) |
RTD Type | None | None | None | None* *1k PLAT RTD for HSD, RSD |
None | None | None | 1k PLAT_RTD | None | None |
Settings | 1cc ET | 5cc | 10cc | 30cc | 60cc | 150cc | DSD-50 | HSD-10-Ardes | SDS-30XT | SDS-60XT |
SDS, HSD, and RSD Heads (with or without COD) (Various Tube Diameters, Standard Gear Ratios) |
DSD-50 (1:1) | Special (with or without COD) |