Difference between revisions of "Settings"

From Hyrel3D
Jump to: navigation, search
(Created page with "== '''Loading Settings''' == Last, you should load/reload your settings: # Setings > Printer. # Load Settings from File (find your custom file, or the most recent one named ...")
 
(Loading Settings)
Line 1: Line 1:
== '''Loading Settings''' ==
+
== '''Printer Settings''' ==
  
Last, you should load/reload your settings:
+
Last, you should (re)load your settings:
 +
 
 +
[[File:Printer_settings_3.png]]
  
 
# Setings > Printer.
 
# Setings > Printer.

Revision as of 17:47, 23 May 2018

Printer Settings

Last, you should (re)load your settings:

Printer settings 3.png

  1. Setings > Printer.
  2. Load Settings from File (find your custom file, or the most recent one named for your model of printer.).
  3. Set or change color selections as desired on the last tab.
  4. Flash Motion Settings.
  5. Apply.
  6. Write to local file with your custom name, as a backup.
  7. OK.