Difference between revisions of "Published Papers"

From Hyrel3D
Jump to: navigation, search
(Published Papers Citing Hyrel Warm Flow)
(189 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
|}
 
|}
  
Below is a list of published works citing Hyrel equipment. 65 documents as of 31 Aug 2018.
+
Below is a list of published works citing Hyrel equipment. 166 documents as of 2 April, 2020.
  
 
== '''Published Papers''' Citing Hybrid Manufacturing ==
 
== '''Published Papers''' Citing Hybrid Manufacturing ==
 +
 +
==== Published in 2019 ====
 +
 +
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190033081.pdf Additive Manufacturing Technologies for Aerospace Applications] by [http://nasa.gov NASA]
 +
*[https://res.mdpi.com/data/data-04-00071/article_deploy/data-04-00071.pdf?filename=&attachment=1 Isolation, Characterization, and Agent-Based Modeling of Mesenchymal Stem Cells in a Bio-construct for Myocardial Regeneration Scaffold Design] by a team from the [https://www.uao.edu.co/ Universidad Autónoma de Occidente de Cali - Colombia] and the [https://www.hes-so.ch/en/homepage-hes-so-1679.html University of Applied Sciences and Arts, Western Switzerland]
  
 
==== Published in 2018 ====
 
==== Published in 2018 ====
  
 +
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/admt.201800490 3D‐Printed Gastric Resident Electronics] by a team from [https://ki.mit.edu/ The Koch Institute for Integrative Cancer Research at MIT]
 +
* [https://www.sciencedirect.com/science/article/pii/S0378517318306318 3D Printed Capsules for Quantitative Regional Absorption Studies in the GI Tract] by a team from [https://www.merck.com Merck Pharmaceuticals]
 
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]
 
* [https://link.springer.com/chapter/10.1007/978-3-319-90755-0_6 Fused Deposition Modelling: Advances in Engineering and Medicine] in [https://link.springer.com/book/10.1007/978-3-319-90755-0 3D Printing of Pharmaceuticals]
  
 
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]
 
* [http://hyrel3d.net/papers/Hybrid_Processes_in_Additive_Manufacturing.pdf Hybrid Processes in Additive Manufacturing] by a team primarily from the [https://engineering.unl.edu/mme/ University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering]
  
== '''Published Papers''' Citing [[Cold_and_Warm_Flow|Hyrel Cold Flow]] ==
+
== '''Published Papers''' Citing Electro- or Electro-Melt- Spinning ==
 +
 
 +
==== Published in 2019 ====
 +
 
 +
* [https://www.mdpi.com/1999-4923/11/12/678 Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications] by the [https://www.farmaatsia.ut.ee/en Institute of Pharmacy, University of Tartu, Estonia] and the [https://www.pharmscilab.fi/ Pharmeceutical Sciences laboratory at Abo Akademi University, Finland]
 +
 
 +
== '''Published Papers''' Citing [[Reservoir_Heads|Unheated Reservoir Printing]] ==
 +
 
 +
==== Published in 2020 ====
 +
 
 +
* [https://www.sciencedirect.com/science/article/pii/S0272884220308956 3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry] by a team from [https://www.alfred.edu/academics/colleges-schools/college-ceramics/index.cfm The New York State College of Ceramics at Alfred University]
 +
* [https://www.sciencedirect.com/science/article/pii/S2352492819303617 On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds] by a team mostly from Australian Universities.
 +
* [https://www.sciencedirect.com/science/article/abs/pii/S2211285520302330#! All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]
 +
* [https://books.google.com/books?hl=en&lr=&id=RLvTDwAAQBAJ&oi=fnd&pg=PA15&ots=xJ25ErPLYp&sig=N0_q36v150zggdku_u3s76ACLso#v=onepage&q&f=false Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms] by  Adam Procopio from [https://www.merck.com/index.html Merck Pharmceuticals]
 +
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218020300328 Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]
 +
* [https://www.sciencedirect.com/science/article/pii/S2214860419321797 3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture] by a team from [https://nyuad.nyu.edu/en/ New York University, Abu Dhabi]
 +
* [https://www.sciencedirect.com/science/article/abs/pii/S2213846319301397 Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source] by a team from the [https://engineering.vanderbilt.edu/me/ Department of Mechanical Engineering, Vanderbilt University]
 +
* [https://www.sciencedirect.com/science/article/abs/pii/S001021802030033X Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49043 Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials] by a team from [https://international.bahcesehir.edu.tr/ Bahçeşehir University], [https://www.sabanciuniv.edu/en Piri Reis University], and [https://www.sabanciuniv.edu/en Sabanci University] in Istanbul
 +
* [https://aip.scitation.org/doi/full/10.1063/1.5134089 Spatially Focused Microwave Ignition of Metallized Energetic Materials], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].
 +
* [https://ieeexplore.ieee.org/abstract/document/8956042 Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite] by a team from several departments at [http://www.ucla.edu/ The University of California, Los Angeles (UCLA)]
 +
* [https://journals.sagepub.com/doi/abs/10.1177/0361198120902704 Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites] by a team from the [https://engineering.vanderbilt.edu/cee/ Department of Civil and Environmental Engineering, Vanderbilt University]
 +
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b15451 Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]
 +
 
 +
==== Published in 2019 ====
 +
 
 +
* [https://books.google.com/books?hl=en&lr=&id=Gs2-DwAAQBAJ&oi=fnd&pg=PA151&ots=yrumKbUKKl&sig=mCVVmpFYc00ZKbzyEZ1Vgzzqh18#v=onepage&q&f=false Biodegradable Polymer Blends for Food Packaging Applications], a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home The Department of Materials Science and Engineering of Tuskegee University]
 +
* [https://www.nature.com/articles/s41598-019-53687-0 Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests] by [https://www.tu-darmstadt.de/index.en.jsp TU Darmstadt]
 +
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b14111 Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability] by a team from the [https://www.colorado.edu/lab/whiting/ Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder]
 +
* [https://link.springer.com/article/10.1007/s12274-019-2534-1 3D Printing an Electrode of Living Bacteria] by a team from [https://www.chemistry.ucsc.edu/ Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz]
 +
* [https://www.sciencedirect.com/science/article/pii/S0010218019303864#! Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films], by a team from the Engineering Departments of [https://admissions.ucr.edu/colleges/marlan-and-rosemary-bourns-college-of-engineering University of California, Riverside] and the [https://eng.umd.edu/ University of Maryland].
 +
* [https://search.proquest.com/openview/389f76ce4dcf2de3c02855237d8360ef/ Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer] by a team from the [https://www.engr.colostate.edu/ Colorado State University College of Engineering]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/prep.201900159 Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials] by a team from the [http://www.mse.gatech.edu/ School of Materials Science and Engineering (MSE) at Georgia Tech]
 +
* [https://www.osti.gov/servlets/purl/1564202 3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs)] by a team from [http://ornl.gov Oak Ridge National Laboratory]
 +
* [https://ieeexplore.ieee.org/abstract/document/8792957 Additive Manufacturing of Spiral Windings for a Pot-core Constant-flux Inductor] by a team from the [https://mse.vt.edu/ Material Science & Engineering Department of Virginia Tech]
 +
* [https://link.springer.com/chapter/10.1007/10_2019_108 Bioprinting Technologies in Tissue Engineering], part of the [https://link.springer.com/bookseries/10 Advances in Biochemical Engineering/Biotechnology] book series.
 +
* [https://www.sciencedirect.com/science/article/pii/S001430571931002X 3D-Printability of Aqueous poly(ethylene oxide)(PEO) G[els] by a team primarily from the [https://meditsiiniteadused.ut.ee/en Faculty of Medicine, University of Tartu]
 +
* [https://doi.org/10.1002/adem.201900604 A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201900158 Additive Manufacturing of 3D Structures Composed of Wood Materials] by [https://scholars.huji.ac.il/magdassi/home Prof. Shlomo Magdassi's] group at [http://new.huji.ac.il/en The Hebrew University of Jerusalem]
 +
* [https://patentimages.storage.googleapis.com/3d/0a/dd/7cbdffd6d5f5ef/US20190168446A1.pdf Three-Dimensional Printing Control], a patent application by a team from [https://c3dmaterials.com/ Chromatic 3D Materials]
 +
* [https://patentimages.storage.googleapis.com/33/b4/42/fe445f0a06a898/US20190167961A1.pdf Methods and systems for precision application of agents to a target surface], a patent application by a team from [https://us.pg.com/ Procter & Gamble]
 +
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=2464&context=gs_theses hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write], a Masters' Thesis from the [https://uconn.edu/ University of Connecticut]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.201900142 Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles] by a team from [https://uwaterloo.ca/waterloo-composite-biomaterial-systems-lab/ the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo]
 +
* [https://www.nature.com/articles/s41467-019-10061-y Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx The School of Materials Science and Engineering, Nanyang Technological University] and [https://www.share-huj.edu.sg/newcreate Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801553 Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration]  by a team by a team from [http://www.tamu.edu/ Texas A&M University].
 +
* [https://aip.scitation.org/doi/full/10.1063/1.5088801 Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate] by a team from the [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]
 +
* [https://www.sciencedirect.com/science/article/pii/S0264127519302278 Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling] by a team from [https://uwaterloo.ca/systems-design-engineering/?utm_source=uwaterloo.ca%2Fengineering&utm_medium=site The Systems Design Engineering Department of The University of Waterloo, Canada]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201900469 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Department of [https://case.edu/ Case Western Reserve University]
 +
* [https://patents.google.com/patent/US20190077071A1/en Extrusion Printing of Liquid Crystal Elastomers], a patent application by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]
 +
* [https://www.mdpi.com/1996-1944/12/5/817/pdf Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components] by a team from [http://vt.edu Virginia Tech]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808424 3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities] by a team from [http://www.mse.ntu.edu.sg/Research/create/Pages/Home.aspx Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201801048 Advancing Frontiers in Bone Bioprinting], by a team primarily from [http://www.ucla.edu/ The University of California at Los Angeles]
 +
* [https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.9b00066 Direct Writing of Tunable Living Inks for Bioprocess Intensification] in [https://pubs.acs.org/journal/nalefd ACS's Nano Letters]
 +
* [https://pubs.acs.org/doi/abs/10.1021/acsami.8b13792 Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting] by a team from the [https://www.bme.ufl.edu/ University of Florida's Biomedical Engineering Department]
 +
* [https://arc.aiaa.org/doi/abs/10.2514/6.2019-1239 Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant] by a team from [https://www.me.iastate.edu/ Iowa State University's Mechanical Engineering Department]
 +
* [https://link.springer.com/article/10.1007/s41779-018-00299-y Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering] by a multi-disciplinary, multi-university team from Istanbul, Turkey
 +
* [https://pubs.acs.org/doi/abs/10.1021/acs.molpharmaceut.8b00836 3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy] by a team from the [https://www.stlcop.edu/ St. Louis College of Pharmacy]
  
 
==== Published in 2018 ====
 
==== Published in 2018 ====
  
 +
*[https://www.sciencedirect.com/science/article/pii/S2214289418300504 Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]
 +
*[http://sffsymposium.engr.utexas.edu/sites/default/files/2018/078%20AdditiveManufacturingofAluminaComponentsbyEx.pdf Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes] by a team from [https://www.sandia.gov Sandia National Laboratory] and [http://cmem.unm.edu/ The University of New Mexico's Center for MicroEngineered Materials]
 +
*[https://onlinelibrary.wiley.com/doi/pdf/10.1002/adhm.201801353 Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone] by a team from the [https://sydney.edu.au/engineering/about/school-of-aerospace-mechanical-and-mechatronic-engineering.html/ School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney] and the [http://www.chemistry.unsw.edu.au/ School of Chemistry, University of New South Wales, Sydney]
 +
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.201800343 Hydrocolloid Inks for 3D Printing of Porous Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://chme.nmsu.edu/ The Department of Chemical and Materials Engineering, New Mexico State University]
 +
*[http://www.freepatentsonline.com/y2018/0320008.html Block Copolymer Ink Formulation for 3D Printing and Method of Making a 3D Printed Radiofrequency (RF) Device] by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)] and [https://www.harvard.edu Harvard University]
 +
*[https://www.sciencedirect.com/science/article/pii/S2214860417304013 Additive Manufacturing- A Review of 4D Printing and Future Applications] by a team from [https://www.esa.int/About_Us/ESTEC/ESTEC_European_Space_Research_and_Technology_Centre The European Space Research and Technology Center]
 +
*[https://www.sciencedirect.com/science/article/pii/S0142961218306641 Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels] by a team with members from [https://engineering.tamu.edu/biomedical/index.html The Department of Biomedical Engineering, Texas A&M University], [https://www.bme.utexas.edu/ The Department of Biomedical Engineering, University of Texas at Austin], and [https://bioengineering.rice.edu/ The Department of Bioengineering, Rice University].
 
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]
 
* [https://opencommons.uconn.edu/cgi/viewcontent.cgi?article=1601&context=srhonors_theses Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro] a thesis by Marisa E. Boch from the [https://cbe.engr.uconn.edu Department of Chemical and Biomolecular Engineering] at the [http://uconn.ecu University of Connecticut]
  
* [https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the Chemistry and Physics of Materials department of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg].
+
*[https://www.researchgate.net/profile/Homa_Maleki2/publication/325559793_Compressible_thermally_insulating_and_fire_retardant_aerogels_through_self-assembling_the_silk_fibroin_biopolymer_inside_the_silica_structure_-_An_approach_towards_3D_printing_of_aerogels/links/5b2ca6930f7e9b0df5ba7281/Compressible-thermally-insulating-and-fire-retardant-aerogels-through-self-assembling-the-silk-fibroin-biopolymer-inside-the-silica-structure-An-approach-towards-3D-printing-of-aerogels.pdf Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels] by a team from the [https://www.uni-salzburg.at/index.php?id=210387&L=1 Chemistry and Physics of Materials Department] of [https://www.uni-salzburg.at/index.php?id=52&L=1 The University of Salzburg] and [https://www.chemie.uni-koeln.de/forschung_ac.html?&L=1 School of Inorganic Chemistry] at [http://www.portal.uni-koeln.de/9441.html?L=1 The University of Cologne].
  
 
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''
 
* [https://www.nature.com/articles/s41467-018-04800-w.pdf Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators] by an interdisciplinary team from [https://www.northwestern.edu Northwestern University]. ''The 3D printing experiments were supported by the '''[http://www.wpafb.af.mil/afrl.aspx Air Force Research Laboratory]''' under agreement number FA8650-15-2-5518''
Line 42: Line 112:
 
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]
 
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]
 
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].
 
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by the [http://www.tuskegee.edu/academics/colleges/ceps/ceps_special_programs/phd_program_in_materials_science_engineering.aspx Department of Materials Science and Engineering] and the Department of Pathobiology, [http://www.tuskegee.edu/academics/colleges/cvmnah/school_of_veterinary_medicine.aspx College of Veterinary Medicine] of [http://www.tuskegee.edu Tuskegee University]
+
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by a team from [http://www.tuskegee.edu Tuskegee University]
 
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]
 
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]
  
Line 65: Line 135:
 
==== Published in 2014 ====
 
==== Published in 2014 ====
  
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]  
+
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]
  
== '''Published Video''' Citing [[Cold_and_Warm_Flow|Hyrel Cold Flow]] ==
+
== '''Published Video''' Citing [[Reservoir_Heads|Unheated Reservoir Printing]] ==
  
 
==== Published in 2017 ====
 
==== Published in 2017 ====
Line 73: Line 143:
 
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]
 
* [https://youtu.be/3nKqwcXcEgY Additive Manufacturing of Toroid Inductor for Electronics Applications] by Chao Ding, [https://vt.edu Virginia Tech]
  
== '''Published Papers''' Citing [[Cold_and_Warm_Flow|Hyrel Warm Flow]] ==
+
== '''Published Papers''' Citing [[Reservoir_Heads|Heated Reservoir Printing]] ==
 +
 
 +
==== Published in 2020 ====
 +
 
 +
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]
 +
 
 +
==== Published in 2019 ====
 +
 
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adbi.201900216 Vascularized Polymers Spatially Control Bacterial Cells on Surfaces] by a team from [https://umaine.edu/chb/ the Department of Chemical and Biomedical Engineering, University of Maine]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adhm.201901136 Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage] by a team from [https://engineering.ucdenver.edu/ the College of Engineering, Design and Computing, University of Colorado Denver]
 +
* [https://www.sciencedirect.com/science/article/pii/S1526612519302981 Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]
 +
* [https://www.sciencedirect.com/science/article/abs/pii/S0041624X19303245 Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion], by a team from the [https://www.clemson.edu/cecas/departments/me/ Department of Mechanical Engineering of Clemson University]
 +
* [https://etd.ohiolink.edu/!etd.send_file?accession=case1565317654535383&disposition=inline Preparation and Applications of Stimuli-Responsive Composite Materials], a PhD dissertation from the [https://chemistry.case.edu/ Case Western Reserve University Department of Chemistry].
 +
* [https://www.nature.com/articles/s41467-019-10843-4#Bib1 In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite] by a team from [https://www.cee.ucr.edu/ the Department of Chemical and Environmental Engineering, University of California, Riverside] and [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park]
 +
* [https://www.sciencedirect.com/science/article/abs/pii/S0010218018305480 Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites] by a team from [https://chbe.umd.edu/ the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland]
 +
* [https://link.springer.com/article/10.1007/s11095-019-2639-y A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics] by a team including the [https://www.ucl.ac.uk/pharmacy/ University College London School of Pharmacy]
 +
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00016 Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics] by a team from [https://www.umdphysics.umd.edu/ University of Maryland's Dept. of Physics]
 +
* [https://www.sciencedirect.com/science/article/pii/S2405886618300502 Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey]
 +
* [https://pubs.rsc.org/en/content/articlelanding/2019/ta/c8ta12428k/unauth#!divAbstract 3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties] by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.
 +
* [https://patentimages.storage.googleapis.com/6f/ad/ce/ad86b63cd48ce8/US20190030794A1.pdf Additive Processing of Fluoroelastomers], a patent application by a team from [https://www.3m.com/ 3M]
 +
* [https://patents.google.com/patent/US20190022928A1/en Additive Processing of Fluoropolymers], a patent application by a team from [https://www.3m.com/ 3M]
  
 
==== Published in 2018 ====
 
==== Published in 2018 ====
  
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals
+
* [https://www.researchgate.net/publication/329216477_Molecularly-Engineered_4D-Printed_Liquid_Crystal_Elastomer_Actuators Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators] by a team from the [https://be.utdallas.edu/ Bioengineering Department of University of Texas, Dallas]
] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]
+
* [https://www.researchgate.net/profile/David_Ballard6/publication/329000422_3D_printing_of_surgical_hernia_meshes_impregnated_with_contrast_agents_in_vitro_proof_of_concept_with_imaging_characteristics_on_computed_tomography/links/5bef0e1892851c6b27c495d2/3D-printing-of-surgical-hernia-meshes-impregnated-with-contrast-agents-in-vitro-proof-of-concept-with-imaging-characteristics-on-computed-tomography.pdf 3D Printing of Surgical Hernia Meshes Impregnated with Contrast Agents: In Vitro Proof of Concept with Imaging Characteristics on Computed Tomography] by a team from [https://wustl.edu/ Washington University in St. Louis]
 +
* [https://www.sciencedirect.com/science/article/pii/S2405886618300113 Composites of Fatty Acids and Ceramic Powders are Versatile Biomaterials for Personalized Implants and Controlled Release of Pharmaceuticals] by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]
 
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany
 
* [http://www.mdpi.com/2310-2861/4/3/69/htm Extrusion-Based 3D Printing of Poly (ethylene glycol) Diacrylate Hydrogels Containing Positively and Negatively Charged Groups] by a team from the [https://www.uni-stuttgart.de/en/ University of Stuttgart] and the [https://www.igb.fraunhofer.de/en.html Fraunhofer Institute], in Stuttgart, Germany
 
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]
 
* [http://pubs.acs.org/doi/abs/10.1021/acs.langmuir.7b02540 Nanoengineered Colloidal Inks for 3D Bioprinting] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/langd5 Langmuir]
Line 85: Line 176:
  
 
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]
 
* [http://pubs.acs.org/doi/abs/10.1021/acsami.7b13602 Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] in the [http://www.acs.org/content/acs/en.html American Chemical Society's] [http://pubs.acs.org/toc/aamick/current Applied Materials & Interfaces Journal]
+
*[http://pubs.acs.org/doi/abs/10.1021/acsami.7b11851 4D Printing of Liquid Crystal Elastomers] by a team from the [https://be.utdallas.edu/ Bioengineering Department of the University of Texas, Dallas]
 
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]
 
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]
  
== '''Published Papers''' Citing Hyrel [[Hot_Flow|Hot Flow]] ==
+
== '''Published Papers''' Citing Hyrel [[Filament_Heads|Filament Printing]] ==
 +
 
 +
==== Published in 2020 ====
 +
 
 +
* [https://ieeexplore.ieee.org/abstract/document/9050017 Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]
 +
* [https://www.sciencedirect.com/science/article/pii/S0378517320301393 3D Printing by Fused Deposition Modeling of Single- and Multi-Compartment Hollow Systems for Oral Delivery - A Review] by a teamfrom [http://users.unimi.it/gazzalab/locations/dipartimento-scienze-farmaceutiche-sezione-di-tecnologia-e-legislazione-farmaceutiche-maria-edvige-sangalli/ Sezione di Tecnologia e Legislazione Farmaceutiche “Maria Edvige Sangalli”, Dipartimento di Scienze Farmaceutiche, Università degli Studi di Milano]
 +
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.49117 Evaluation of Additively Manufactured Ultraperformance Polymers to use as Thermal Protection Systems for Spacecraft] by a team from Texas and Australia.
 +
* [https://search.informit.com.au/documentSummary;dn=904356964367662;res=IELENG 3D Printing of Recycled PET Polymer Composite Infused with Sustainable Carbon] by a team from the [https://www.tuskegee.edu/programs-courses/colleges-schools/coe/materials-science-and-engineering-home Materials Science & Enginnernig Department of Tuskegee University]
 +
 
 +
==== Published in 2019 ====
 +
 
 +
* [https://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1432&context=mechengfacpub Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells] by H. Mozafari from [https://engineering.unl.edu/mme/ The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln]
 +
* [https://ieeexplore.ieee.org/abstract/document/8920352 UHF RFID-based Additively Manufactured Passive Wireless Sensor for Detecting Micrometeoroid and Orbital Debris Impacts] by a team from [https://erau.edu/degrees/bachelor/aerospace-engineering Aerospace Engineering at Embry-Riddle Aeronautical University]
 +
* [https://www.mdpi.com/2411-9660/3/4/50 The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites] by a team from [https://www.lboro.ac.uk/ Loughborough University]
 +
* [https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20190032205.pdf Additive Manufacturing of Multi-Material Systems for Aerospace Applications] by a team from [https://www.nasa.gov/centers/glenn/home/index.html NASA's Glenn Research Center]
 +
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/app.48545 Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage], in the Journal of Applied Polymer Science
 +
* [https://escholarship.org/uc/item/5vh0z78v#main Magnetic 3D Printing of Hexaferrite Material], a PhD dissertation from the [https://www.ee.ucla.edu/ University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department].
 +
* [http://josh.icis.pcz.pl/~K/resources/OWpapers/MROW2019b.pdf Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process] by a team from [http://www.buffalo.edu/ SUNY Buffalo]'s [http://engineering.buffalo.edu/mechanical-aerospace.html Department of Mechanical and Aerospace Engineering], [http://engineering.buffalo.edu/materials-design-innovation.html Department of Materials Design and Innovation], and [http://engineering.buffalo.edu/industrial-systems.html Department of Industrial and Systems Engineering] and the [https://www.unl.edu/ University of Nebraska-Lincoln] [https://engineering.unl.edu/mme/ Department of Mechanical and Materials Engineering]
 +
* [http://www.freepatentsonline.com/y2019/0231697.html Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs] by a team from [https://lyndra.com/ Lyndra Theraputics]
 +
* [http://www.freepatentsonline.com/y2019/0209090.html Gastric Resident Electronics] a patent application by a team from the [http://web.mit.edu the Massachusetts Institute of Technology (MIT)]
 +
* [https://vtechworks.lib.vt.edu/bitstream/handle/10919/91900/Liu_C_D_2019.pdf?sequence=1&isAllowed=y Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control], A Dissertation Presented to The Academic Faculty of the [https://www.ise.vt.edu/ Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech]
 +
* [https://link.springer.com/article/10.1007/s40005-019-00451-1 The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer] by a team from [http://pharmacy.yonsei.ac.kr/ the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University]
 +
* [https://www.cambridge.org/core/journals/mrs-communications/article/on-the-thermal-processing-and-mechanical-properties-of-3dprinted-polyether-ether-ketone/602A649BAF3A69235982033106FEF57E On the thermal processing and mechanical properties of 3D-printed polyether ether ketone] (PEEK) by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering] and the Key Laboratory of E&M, [http://www.wsc.zjut.edu.cn/zjuten/index.jsp Zhejiang University of Technology]
 +
* [https://www.sciencedirect.com/science/article/pii/S1359835X19302465 Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling] by a team from [https://www.nanociencia.imdea.org/ IMDEA Nanociencia] in Madrid
 +
* [https://pubs.acs.org/doi/abs/10.1021/acsami.9b06081 3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape] by a team from the [https://www.gatech.edu/ Georgia Tech] [https://www.me.gatech.edu/ School of Mechanical Engineering]
 +
* [https://ieeexplore.ieee.org/abstract/document/8722752 Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components] by the [https://www.sutd.edu.sg/ Singapore University of Technology and Design's] [https://dmand.sutd.edu.sg/ DManD (Digitial Manufacturing and Design) Center]
 +
* [https://www.sciencedirect.com/science/article/pii/S0278612518304060 Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication] by a team from the [https://www.ise.vt.edu/ Virginia Tech Grado Department of Industrial and Systems Engineering]
 +
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.9b00118 Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing] by a team from the [https://chemistry.case.edu/ Chemistry] and [https://engineering.case.edu/macromolecular-science-and-engineering Macromolecular Science & Engineering] Departments of [https://case.edu/ Case Western Reserve University]
 +
* [https://www.sciencedirect.com/science/article/pii/B9780128125243000077 Chapter 7 - Additive Manufacturing of Polyaryletherketones] in the [https://www.sciencedirect.com/book/9780128125243/peek-biomaterials-handbook PEEK Biomaterials Handbook]
 +
* [https://www.sciencedirect.com/science/article/pii/S0032386119301107 Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling] by a team from [http://www.mse.gatech.edu/ The Materials Science and Engineering School of Georgia Tech]
  
 
==== Published in 2018 ====
 
==== Published in 2018 ====
  
 +
* [https://search.proquest.com/openview/eea6c862dd126abc5b01f7164e8f2761/1?pq-origsite=gscholar&cbl=18750&diss=y Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches], a Masters Thesis by Kathryn Hall from the [http://und.edu University of North Dakota]
 +
* [https://www.mdpi.com/1996-1944/12/1/1/pdf Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites] by a team from the [https://engineering.unl.edu/mme/ Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln]
 +
* [http://sffsymposium.engr.utexas.edu/sites/default/files/2018/019%20PrecisionEnhancementof3DPrintingviaInSituM.pdf Precision Enhancement of 3D Printing via in-situ Metrology] by a team from UCLA's [https://www.mae.ucla.edu/ Mechanical and Aerospace Engineering] and [https://www.ee.ucla.edu Electrical and Computer Engineering] Departments and the [https://cnsi.ucla.edu/California NanoSystems Institute]
 +
* [https://patentimages.storage.googleapis.com/b6/d1/c3/a9cfe4b105c242/US20180298215A1.pdf Feedstock for 3D Printing and Uses Thereof] Patent application by a team from [https://www.sdu.dk/en/ The University of Southern Denmark]
 +
* [https://www.sciencedirect.com/science/article/pii/S2214860418303257 Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method] by a team from the [https://www.gatech.edu Georgia Tech] [http://www.mse.gatech.edu School of Materials Science and Engineering]
 +
* [https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.8b02283 3D Printed Sustainable Biochar-Recycled PET Composite] by a team from [http://www.tuskegee.edu Tuskegee University]
 
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]
 
* [https://www.sciencedirect.com/science/article/pii/S0278612518300724 Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing] by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]
 
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory]  
 
* [http://www.euronoise2018.eu/docs/papers/2_Euronoise2018.pdf 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals] by a team from the [https://www.nrl.navy.mil/ US Naval Research Laboratory]  

Revision as of 13:55, 2 April 2020

Below is a list of published works citing Hyrel equipment. 166 documents as of 2 April, 2020.

Published Papers Citing Hybrid Manufacturing

Published in 2019

Published in 2018

Published Papers Citing Electro- or Electro-Melt- Spinning

Published in 2019

Published Papers Citing Unheated Reservoir Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Published in 2014

Published Video Citing Unheated Reservoir Printing

Published in 2017

Published Papers Citing Heated Reservoir Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published Papers Citing Hyrel Filament Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015