Published Papers

Below is a list of published works citing Hyrel equipment. 62 documents as of 29 July 2018.

Published Papers Citing Hybrid Manufacturing

Published in 2018

• [Hybrid Processes in Additive Manufacturing by a team primarily from the University of Nebraska–Lincoln's Department of Mechanical & Materials Engineering

Published Papers Citing Hyrel Cold Flow

Published in 2018

• Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro a thesis by Marisa E. Boch from the Department of Chemical and Biomolecular Engineering at the University of Connecticut

• Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels by a team from the Chemistry and Physics of Materials department of The University of Salzburg.

• Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators by an interdisciplinary team from Northwestern University. The 3D printing experiments were supported by the Air Force Research Laboratory under agreement number FA8650-15-2-5518
• Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark by Prof. Shlomo Magdassi's group at The Hebrew University of Jerusalem.
• Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols by a team from Northwestern University
• 3D Printing of Hierarchical Porous Silica and α‐Quartz by a team from The University of Salzburg
• Polymeric Materials and Articles Manufactured There From by a team from Procter and Gamble
• UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics by a team from Virginia Tech
• Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion by a team from Northwestern University

Published in 2017

• Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting by a team by a team from three disciplines of Texas A&M University.
• Feasibility of Printing 3D Bone Models for Education at TUCVM at ResearchGate
• Design and Additive Manufacturing of Multi-Permeability Magnetic Cores, by a team from Virginia Tech
• Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders, by a team from Northwestern Univeristy
• In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration, by a team from The University of Connecticut
• Self-Actuating 3D Printed Packaging for Deployable Antennas, by a team from Georgia Tech
• Enabling Process Intensification via 3D Printing of Catalytic Structures by a team from University of Queensland
• 3D Bioprinting for Musculoskeletal Applications by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in Future Medicine
• UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration by Dr. Y. Yan (and others), Virginia Tech
• Alginate Hydrogels for Bone Tissue Regeneration by Stephanie T. Bendtsen of The University of Connecticut
• Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing by Nicholas Sears et. al., of the Biomedical Engineering Department of Texas A&M University.
• Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties by the Department of Materials Science and Engineering and the Department of Pathobiology, College of Veterinary Medicine of Tuskegee University
• Design Methodology and Materials for Additive Manufacturing of Magnetic Components - PhD Thesis of Y. Yan, Virginia Tech

Published in 2016

• Additive Manufacturing of Magnetic Components for Heterogeneous Integration by Dr. Y. Yan (and others), Virginia Tech
• Bioprinting Defined Heterogeneous Cellular Microenvironments from The Biomaterials and Tissue Engineering Research Unit of the Aerospace, Mechanical and Mechatronic Engineering Department of The University of Sydney
• A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications by a team from Georgia Tech
• Additive Manufacturing of Planar Inductor for Power Electronics Applications by a team from Virginia Tech
• Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects in Nature.com's Scientific Reports
• Emulsion Inks for 3D Printing of High Porosity Materials in the Macromolecular Journals
• 3D Printed Energetics by the Weapons and Combat Systems Division of the Australian Department of Defense

Published in 2015

• 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense - Presentation by Elizabeth Cosgriff-Hernández of Department of Biomedical Engineering, Texas A&M University
• Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo from multiple organizations, at BioMaterials.org
• Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept by the Department of Materials Science and Engineering of Lehigh University
• Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach in The American Chemical Society's ACS Nano

Published in 2014

• Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects from The Biomaterials and Tissue Engineering Research Unit of the Aerospace, Mechanical and Mechatronic Engineering Department of The University of Sydney

Published Video Citing Hyrel Cold Flow

Published in 2017

• Additive Manufacturing of Toroid Inductor for Electronics Applications by Chao Ding, Virginia Tech

Published Papers Citing Hyrel Warm Flow

Published in 2018

• Nanoengineered Colloidal Inks for 3D Bioprinting in The American Chemical Society's Langmuir

Published in 2017

• Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting in the American Chemical Society's Applied Materials & Interfaces Journal
• 4D Printing of Liquid Crystal Elastomers in the American Chemical Society's Applied Materials & Interfaces Journal
• Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG in The American Chemical Society's ACS Nano

Published Papers Citing Hyrel Hot Flow

Published in 2018

• Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]
• 3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals by a team from the US Naval Research Laboratory
• Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule by a team from Merck Pharmaceuticals
• Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling by the Mechanical Engineering Staff at Worcester Polytechnic Institute

Published in 2017

• NANOSATC-BR2, 2 unit CUBESAT, Power Analysis, Solar Flux Prediction, Design and 3D Printing of the Flight Model from the UFSM & INPE’S NANOSATC-BR, CUBESAT Development Program by a team from the Federal University of Santa Maria (UFSM), Brasil.
• A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication by Smruti Ranjan Sahoo at Rochester Institute of Technology
• Tensile Mechanical Properties of Polypropylene Composites Fabricated by Material Extrusion, a reviewed paper of the Solid Freeform Fabrication Symposium 2017.
• Effect of Process Parameters and Shot Peening on Mechanical Behavior of ABS Parts Manufactured by Fused Filament Fabrication (FFF), a reviewed paper of the Solid Freeform Fabrication Symposium 2017.
• Hybrid Processes in Additive Manufacturing in the Journal of Manufacturing Science and Engineering of the American Society of Mechanical Engineers
• Effects of Material Properties on Warpage in Fused Deposition Modeling Parts in The International Journal of Advanced Manufacturing Technology
• Thermal and Mechanical Properties of 3D Printed Boron Nitride – ABS Composites, in Applied Composite Materials
• Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators in Sensors, a Journal of the Multidisciplinary Digital Publishing Institute
• Self-Actuating 3D Printed Packaging for Deployable Antennas, The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)
• Dynamical Majorana edge modes in a broad class of topological mechanical systems by The New Jersey Institute of Technology

Published in 2016

• High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware published by NASA
• A Low-Cost, Single Platform, Hybrid Manufacturing System for RF Passives, The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)
• Nano-Material Based Flexible Radio Frequency Sensors for Wearable Health and Environment Monitoring: Designs and Prototypes Utilizing 3D/Inkjet Printing Technologies, A Dissertation Presented to The Academic Faculty of The School of Electrical and Computer Engineering at Georgia Tech

Published in 2015

• Button-Shaped RFID Tag Combining Three-Dimensional and Inkjet Printing Technologies, The IET Digital Library.
• Demonstration and Characterization of Fully 3D-printed RF Structures, The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)
• Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications, The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)
• A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design, The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)
• A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications, The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)
• RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments, The European Microwave Association (EuMA)