Difference between revisions of "Repetrel Download"

From Hyrel3D
Jump to: navigation, search
(THIS PAGE IS A PLACHOLDER.)
(Preliminary Steps)
Line 26: Line 26:
 
== '''Preliminary Steps''' ==
 
== '''Preliminary Steps''' ==
  
* Save any stl or gcode files that you want to keep.
+
* Save any files that you want to keep, especially gcode and stl files. Recipes will be saved.
 
* This includes your Printer Settings file:
 
* This includes your Printer Settings file:
 
** For a new install, ignore this.
 
** For a new install, ignore this.

Revision as of 18:40, 4 June 2018

THIS PAGE IS A PLACHOLDER.

VERSION 3 IS NOT YET AVAILABLE TO THE MASSES.


Contact is if you have an issue with your present install.


Install instructions are essentially the same as for v2, but remember to:

  1. Go to Settings > Printer and load the latest config for your model; and
  2. Flash the Motion Controller with the latest HYREL file (ESR adn 30M), or HYDRA file (EHR and Hydra).



This page has instructions for installing the latest Repetrel software and associated applications, drivers, and environment on a new Windows platform, or over an older install.

Preliminary Steps

  • Save any files that you want to keep, especially gcode and stl files. Recipes will be saved.
  • This includes your Printer Settings file:
    • For a new install, ignore this.
    • For a 2>3 upgrade, ignore this.
    • For a 3>3 upgrade, go to Settings > Printer and save your configuration to a file with a name unique to your environment (example: Acme_Lab_West), so that we can easily find it later. Save a copy of this file to your desktop for now.


These steps should each be done in order, and run as administrator.

Install Repetrel Download button.png

This installs the current version of Repetrel. Just uncompress the file and place it at C:.

Your path to Repetrel.exe should be: C:\Repetrel\bin\Repetrel.exe (capitalization may differ).

Install Drivers

Note: This step is only required for new installs.

Next, navigate to C:\Repetrel\bin\_RUN_ME_ON_NEW_INSTALL and execute each numbered file AS ADMINSTRATOR, IN ORDER:

  • 1.Windows 8 Compatibility Resolver.bat
  • 2.dpinst_amd64.exe
  • 3.dpinst_x86.exe
  • 4.CDM v2.12.00 WHQL Certified.exe
  • 5.VCP_V1.3.1_Setup_x64.exe
  • 6.VCP_V1.3.1_Setup.exe
  • 7.vcredist_ia64.exe
  • 8.vcredist_x64.exe
  • 9.vcredist_x86.exe

Configure Slic3r

Next, navigate to C:\Users\hyrel\AppData\Roaming\Slic3r (or whatever the user name is instead of hyrel) and:

  • Launch Slicer.exe
  • Go to File > Preferences
  • Select Expert mode and click OK.
  • Exit Slicer

Flash Firmware

Launch Repetrel and follow the instructions at Firmware to flash the Motion Controller

Configure Settings

Within Repetrel, follow the instructions at Settings -

That should be all there is! Please let me know if you have any questions. -Davo