Difference between revisions of "Manuals"

From Hyrel3D
Jump to: navigation, search
(Laser Heads)
(44 intermediate revisions by the same user not shown)
Line 1: Line 1:
===Orientation and Operation===
 
  
[http://hyrel3d.net/downloads/Manuals/1.Hyrel_Quickstart.pdf Hyrel Quickstart]
+
== Accessory Manuals and Videos ==
  
[http://hyrel3d.net/downloads/Manuals/2.Hyrel_Intro_&_EMO.pdf Intro & EMO Print]
+
=== Filament Heads ===
  
[http://hyrel3d.net/downloads/Manuals/3.Hyrel_MK1_Single.pdf MK1 Single Head Print]
+
Or "Hot Flow", for 1.75mm filaments including: ABS, BendLay, Flex45, HIPS, LayBrick, LayWood, MoldLay, NinjaFlex, Nylon, PEEK, PEKK, PEG, PET, PETG, PLA, PlastInk Rubber, PC, PP, PPSU, PVA, T-Glase, Wax Filaments, and more...
  
[http://hyrel3d.net/downloads/Manuals/4.Hyrel_MK1_Multiple.pdf MK1 Multiple Head Print]
+
{| border="1" class="wikitable" style="width: 85%;"
 +
|+ Hot Flow (Filament) Heads
 +
! style="width: 10%;" | Head
 +
! style="width: 8%;" | Min Temp
 +
! style="width: 8%;" | Max Temp
 +
! style="width: 8%;" | Manual
 +
! style="width: 8%;" | Video
 +
! style="width: 50%;" | Filaments
 +
|-
 +
! MK1-250
 +
| Ambient
 +
| 250°C
 +
| [http://hyrel3d.net/downloads/Manuals/MK1-250.pdf MK1-250]
 +
| [https://www.youtube.com/watch?v=yaCYFmoIESk MK1-250]
 +
| ABS, HIPS, LayBrick, LayWood, Nylon, PEG, PET, PETG, PLA, PC, PVA, T-Glase, Wax
 +
|-
 +
! MK1-450
 +
| 300°C
 +
| 450°C
 +
| [http://hyrel3d.net/downloads/Manuals/MK1-450.pdf MK1-450]
 +
| [https://www.youtube.com/watch?v=UvZMecXsHEM MK1-450]
 +
| PEEK, PEKK, Ultem
 +
|-
 +
! MK2-250XT
 +
| Ambient
 +
| 250°C
 +
| [pdf]
 +
| [https://www.youtube.com/watch?v=SOGKeU3vLbs MK2-250]
 +
| BendLay, Flex45, MoldLay, NinjaFlex, PlastInk Rubber, PP, TPEs, TPUs
 +
|-
 +
! HT-250
 +
| Ambient
 +
| 250°C
 +
| [pdf]
 +
| [vid]
 +
| ABS, HIPS, LayBrick, LayWood, Nylon, PEG, PET, PETG, PLA, PC, PVA, T-Glase, Wax
 +
|-
 +
! HT-450
 +
| 300°C
 +
| 450°C
 +
| [pdf]
 +
| [vid]
 +
| PEEK, PEKK, Ultem
 +
|-
 +
|colspan="6" style="text-align:center;" | Note, HT models are new High Torque versions, driving filament from opposite sides, like the MK1-250XT (Extra Torque)
 +
|-
 +
|}
  
===Accessory Manuals===
+
=== Reservoir Heads ===
  
[http://hyrel3d.net/downloads/Manuals/EMO.pdf EMO Emulsion Head Manual]
+
Or "Cold Flow" and "Warm Flow", for Biologicals, Cements, Clays, Inks, Gels, Liquids, Pastes, and Resins, in one- or two-part mixtures of: Clay, Metal (and Precious Metal) Clays, HA, PCL, Plasticine, Play-Doh, PLGA, Porcelain, RTV Silicone, Sugru, and more...
  
[http://hyrel3d.net/downloads/Manuals/LA5-808.pdf LA5 Laser Manual]
+
{| border="1" class="wikitable" style="width: 85%;"
 +
|+ Hot Flow (Filament) Heads
 +
! style="width: 10%;" | Head
 +
! style="width: 10%;" | Max Temp
 +
! style="width: 10%;" | Max Viscosity
 +
! style="width: 10%;" | Max Capacity
 +
! style="width: 10%;" | Manual
 +
! style="width: 10%;" | Video
 +
! style="width: 40%;" | Materials
 +
|-
 +
! SDS-1
 +
| Ambient
 +
| 100,000 Cp
 +
| 1cc
 +
| [http://hyrel3d.net/downloads/Manuals/SDS-01.pdf SDS-1]
 +
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
 +
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
 +
|-
 +
! SDS-5
 +
| Ambient
 +
| 100,000 Cp
 +
| 5cc
 +
| [http://hyrel3d.net/downloads/Manuals/SDS-05.pdf SDS-5]
 +
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
 +
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
 +
|-
 +
! SDS-10
 +
| Ambient
 +
| 100,000 Cp
 +
| 10cc
 +
| [http://hyrel3d.net/downloads/Manuals/SDS-10.pdf SDS-10]
 +
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
 +
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
 +
|-
 +
! SDS-30
 +
| Ambient
 +
| 100,000 Cp
 +
| 30cc
 +
| [http://hyrel3d.net/downloads/Manuals/SDS-30.pdf SDS-30]
 +
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
 +
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
 +
|-
 +
! SDS-60
 +
| Ambient
 +
| 100,000 Cp
 +
| 60cc
 +
| [http://hyrel3d.net/downloads/Manuals/SDS-60.pdf SDS-60]
 +
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
 +
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
 +
|-
 +
! SDS-60
 +
| Ambient
 +
| 300,000 Cp
 +
| 60cc
 +
| [pdf]
 +
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
 +
| Cements, Clays, Pastes
 +
|-
 +
! SDS-150XT
 +
| Ambient
 +
| 300,000 Cp
 +
| 150cc
 +
| [pdf]
 +
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
 +
| Cements, Clays, Pastes
 +
|-
 +
! EMO (-25)
 +
| Ambient
 +
| 300,000 Cp
 +
| 25cc
 +
| [http://hyrel3d.net/downloads/Manuals/EMO.pdf EMO]
 +
| [https://www.youtube.com/watch?v=ktK256u0sN8 EMO]
 +
| Cements, Clays, Plasticine, Porcelain, Play-Doh, Sugru
 +
|-
 +
! VOL (-25)
 +
| 75°C
 +
| 300,000 Cp
 +
| 25cc
 +
| [http://hyrel3d.net/downloads/Manuals/VOL.pdf VOL]
 +
| [https://www.youtube.com/watch?v=9_onCKhT_dg VOL]
 +
| Clays, Plasticine
 +
|-
 +
! KR2 (-15)
 +
| 150°C
 +
| 1,000,000 Cp
 +
| 15cc
 +
| [http://hyrel3d.net/downloads/Manuals/KRA.pdf KR2]
 +
| [https://www.youtube.com/watch?v=QD2FrZ4kg1g KR2, TAM]
 +
| Cements, Clays, PGL, PLGA, Resins
 +
|-
 +
! TAM (-15)
 +
| 250°C
 +
| 1,000,000 Cp
 +
| 15cc
 +
| [http://hyrel3d.net/downloads/Manuals/TAM.pdf TAM]
 +
| [https://www.youtube.com/watch?v=QD2FrZ4kg1g KR2, TAM]
 +
| Cements, Clays, PGL, PLGA, Resins
 +
|-
 +
! Clench Valve
 +
| Ambient
 +
| 100,000 Cp
 +
| varies
 +
| [http://hyrel3d.net/downloads/Manuals/CV.pdf CV]
 +
| [https://www.youtube.com/watch?v=Mz5J8jsb6D4 CV]
 +
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
 +
|-
 +
! DSD (-50)
 +
| Ambient
 +
| 100,000 Cp
 +
| varies
 +
| [http://hyrel3d.net/downloads/Manuals/DSD.pdf DSD]
 +
| [vid]
 +
| Gels, Liquids, Pastes, Resins, RTV
 +
|-
 +
! SMH-2
 +
| Ambient
 +
| 100,000 Cp
 +
| varies
 +
| [http://hyrel3d.net/downloads/Manuals/SMH-2.pdf SMH-2]
 +
| [https://www.youtube.com/watch?v=DQj6oLfrbLo SMH-2]
 +
| Gels, Liquids, Pastes, Resins, RTV
 +
|-
 +
|}
  
[http://hyrel3d.net/downloads/Manuals/LA6-450.pdf LA6 Laser Manual]
+
=== Laser Heads ===
  
[http://hyrel3d.net/downloads/Manuals/MK1-250.pdf MK1-250 Filament Head Manual]
+
For surface marking, etching, and cutting appropriate material with our 5W, 808nm or 6W, 450nm diode lasers. Instructions are different for our 40W, 1,000nm CO2 lasers.
  
[http://hyrel3d.net/downloads/Manuals/SDK.pdf Software Development Kit Manual]
+
{| border="1" class="wikitable" style="width: 85%;"
 +
|+ Laser Heads
 +
! style="width: 10%;" | Head
 +
! style="width: 10%;" | Power
 +
! style="width: 10%;" | Wavelength
 +
! style="width: 10%;" | Manual
 +
! style="width: 10%;" | Video
 +
! style="width: 35%;" | Best Materials
 +
|-
 +
! LA5-808
 +
| 5W
 +
| 808nm
 +
| [http://hyrel3d.net/downloads/Manuals/LA5.pdf LA5]
 +
| [https://www.youtube.com/watch?v=Tz6mRSkOaSk LA5, LA6]
 +
| Dark, opaque materials
 +
|-
 +
! LA6-450
 +
| 6W
 +
| 450nm
 +
| [http://hyrel3d.net/downloads/Manuals/LA65.pdf LA6]
 +
| [https://www.youtube.com/watch?v=Tz6mRSkOaSk LA5, LA6]
 +
| Opaque materials (light or dark)
 +
|-
 +
! LI-40
 +
| 40W
 +
| 10μm
 +
| [http://hyrel3d.net/downloads/Manuals/LA65.pdf LA6]
 +
| [https://www.youtube.com/watch?v=Tz6mRSkOaSk LA5, LA6]
 +
| All materials
 +
|-
 +
|}
  
[http://hyrel3d.net/downloads/Manuals/SDS.pdf SDS Emulsion Head Manual]
+
=== Spindle Tools ===
  
[http://hyrel3d.net/downloads/Manuals/ST1.pdf ST1 Spindle Tool Manual]
+
For LIGHT drilling or milling operations.
 +
 
 +
{| border="1" class="wikitable" style="width: 85%;"
 +
|+ Spindle Tools
 +
! style="width: 10%;" | Head
 +
! style="width: 10%;" | Power
 +
! style="width: 10%;" | Max RPM
 +
! style="width: 10%;" | Manual
 +
! style="width: 10%;" | Video
 +
! style="width: 35%;" | Best Materials
 +
|-
 +
! ST1
 +
| 12VDC, 3.5A, 40W
 +
| 3000
 +
| [http://hyrel3d.net/downloads/Manuals/ST1.pdf ST1]
 +
| [vid]
 +
| Delrin, PEEK, Other Plastics, Machining Wax, Garolite (G10 PCB material)
 +
|-
 +
! ST3
 +
| 48VDC, 8.3A, 400W
 +
| 12,000
 +
| [http://hyrel3d.net/downloads/Manuals/ST3.pdf ST3]
 +
| [vid]
 +
| Aluminum, Brass, Plastics
 +
|-
 +
|}
 +
 
 +
 
 +
 
 +
=== Special Build Plates ===
 +
 
 +
For special temperature needs
 +
 
 +
{| border="1" class="wikitable" style="width: 85%;"
 +
|+ Build Plate
 +
! style="width: 10%;" | Temp Range
 +
! style="width: 10%;" | Power
 +
! style="width: 10%;" | Size
 +
! style="width: 10%;" | Manual
 +
! style="width: 10%;" | Video
 +
! style="width: 35%;" | Description
 +
|-
 +
! HCVB
 +
| 24VDC, 10A, 240W
 +
| 100x100mm
 +
| [http://hyrel3d.net/downloads/Manuals/HCVB.pdf HCVB]
 +
| [vid]
 +
| Heated/Chilled Vacuum Bed for Hydra, EHR models
 +
|-
 +
|}

Revision as of 19:06, 12 July 2019

Accessory Manuals and Videos

Filament Heads

Or "Hot Flow", for 1.75mm filaments including: ABS, BendLay, Flex45, HIPS, LayBrick, LayWood, MoldLay, NinjaFlex, Nylon, PEEK, PEKK, PEG, PET, PETG, PLA, PlastInk Rubber, PC, PP, PPSU, PVA, T-Glase, Wax Filaments, and more...

Hot Flow (Filament) Heads
Head Min Temp Max Temp Manual Video Filaments
MK1-250 Ambient 250°C MK1-250 MK1-250 ABS, HIPS, LayBrick, LayWood, Nylon, PEG, PET, PETG, PLA, PC, PVA, T-Glase, Wax
MK1-450 300°C 450°C MK1-450 MK1-450 PEEK, PEKK, Ultem
MK2-250XT Ambient 250°C [pdf] MK2-250 BendLay, Flex45, MoldLay, NinjaFlex, PlastInk Rubber, PP, TPEs, TPUs
HT-250 Ambient 250°C [pdf] [vid] ABS, HIPS, LayBrick, LayWood, Nylon, PEG, PET, PETG, PLA, PC, PVA, T-Glase, Wax
HT-450 300°C 450°C [pdf] [vid] PEEK, PEKK, Ultem
Note, HT models are new High Torque versions, driving filament from opposite sides, like the MK1-250XT (Extra Torque)

Reservoir Heads

Or "Cold Flow" and "Warm Flow", for Biologicals, Cements, Clays, Inks, Gels, Liquids, Pastes, and Resins, in one- or two-part mixtures of: Clay, Metal (and Precious Metal) Clays, HA, PCL, Plasticine, Play-Doh, PLGA, Porcelain, RTV Silicone, Sugru, and more...

Hot Flow (Filament) Heads
Head Max Temp Max Viscosity Max Capacity Manual Video Materials
SDS-1 Ambient 100,000 Cp 1cc SDS-1 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-5 Ambient 100,000 Cp 5cc SDS-5 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-10 Ambient 100,000 Cp 10cc SDS-10 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-30 Ambient 100,000 Cp 30cc SDS-30 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-60 Ambient 100,000 Cp 60cc SDS-60 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-60 Ambient 300,000 Cp 60cc [pdf] SDS Series Cements, Clays, Pastes
SDS-150XT Ambient 300,000 Cp 150cc [pdf] SDS Series Cements, Clays, Pastes
EMO (-25) Ambient 300,000 Cp 25cc EMO EMO Cements, Clays, Plasticine, Porcelain, Play-Doh, Sugru
VOL (-25) 75°C 300,000 Cp 25cc VOL VOL Clays, Plasticine
KR2 (-15) 150°C 1,000,000 Cp 15cc KR2 KR2, TAM Cements, Clays, PGL, PLGA, Resins
TAM (-15) 250°C 1,000,000 Cp 15cc TAM KR2, TAM Cements, Clays, PGL, PLGA, Resins
Clench Valve Ambient 100,000 Cp varies CV CV Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
DSD (-50) Ambient 100,000 Cp varies DSD [vid] Gels, Liquids, Pastes, Resins, RTV
SMH-2 Ambient 100,000 Cp varies SMH-2 SMH-2 Gels, Liquids, Pastes, Resins, RTV

Laser Heads

For surface marking, etching, and cutting appropriate material with our 5W, 808nm or 6W, 450nm diode lasers. Instructions are different for our 40W, 1,000nm CO2 lasers.

Laser Heads
Head Power Wavelength Manual Video Best Materials
LA5-808 5W 808nm LA5 LA5, LA6 Dark, opaque materials
LA6-450 6W 450nm LA6 LA5, LA6 Opaque materials (light or dark)
LI-40 40W 10μm LA6 LA5, LA6 All materials

Spindle Tools

For LIGHT drilling or milling operations.

Spindle Tools
Head Power Max RPM Manual Video Best Materials
ST1 12VDC, 3.5A, 40W 3000 ST1 [vid] Delrin, PEEK, Other Plastics, Machining Wax, Garolite (G10 PCB material)
ST3 48VDC, 8.3A, 400W 12,000 ST3 [vid] Aluminum, Brass, Plastics


Special Build Plates

For special temperature needs

Build Plate
Temp Range Power Size Manual Video Description
HCVB 24VDC, 10A, 240W 100x100mm HCVB [vid] Heated/Chilled Vacuum Bed for Hydra, EHR models