Instructions

From Hyrel3D
Revision as of 13:34, 24 June 2015 by Davo (talk | contribs) (Created page with "Category:HowTo {| align="right" | __TOC__ |} Here are some step by step instructions for learning how to use your Hyrel 3D Printer. == Unboxing Your Printer == Video: ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Here are some step by step instructions for learning how to use your Hyrel 3D Printer.


Unboxing Your Printer

Video: https://www.youtube.com/watch?v=bHxC2__DPsM

Basic Printing

First Print PDF: http://hyrel3d.net/instructions/t1/HYREL%203D%20-%20T1%20Training%20Session.pdf

Trammig your bed

a. For the current printers: https://www.youtube.com/watch?v=lK_x0M8p9Ew

b. For the older printers: https://www.youtube.com/watch?v=soY9uOw3nCM

Loading your material

a. MK1-250 for 1.75mm filaments: http://youtu.be/Llas80vYFPc

b. EMO-25 for emulsifiables (pastes): https://www.youtube.com/watch?v=4yuzpUqeE-Y

Setting your Z-Zero position

Video: http://youtu.be/ArDX4UpflmE

Your First Print

a. MK1-250 for 1.75mm filaments: https://www.youtube.com/watch?v=Fg9omXlYR-Q

b. EMO-25 for emulsifiables (pastes): http://youtu.be/tLHpaePTP-k

Intermediate Printing

Intermediate Print PDF: http://hyrel3d.net/instructions/HYREL%20LLC%20-%20MultiPrint%20v0.6.pdf

Z Level Adjustment for Dual Heads

Video: https://www.youtube.com/watch?v=IQscrgv6uaQ

Parallel Print with Dual Heads

Parallel Calibration Marking with Dual Heads

X/Y Offest Calibration for Dual Heads

Serial Print (Zebra) for Dual Heads

Serial Print (Support Material) for Dual Heads

Serial Print (Ping Pong) for Dual Heads

Advanced Printing

== Advanced Print PDF: (to link from here)

Videos:

(work in progress)

Troubleshooting and Maintenance

A. Adjusting the X-arm: https://youtu.be/0gFX6Mh-ths

B. Adjusting the Y-arm: https://youtu.be/LZd0ecogGlQ

C. Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8

D. Upgrading your MK1 fan nozzle: http://youtu.be/T6-ZLEHyxho

E. Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c

F. Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUIa