Difference between revisions of "Reservoir Heads"

From Hyrel3D
Jump to: navigation, search
(METAL Reservoir Heads)
(PLASTIC Reservoir Heads)
(29 intermediate revisions by the same user not shown)
Line 76: Line 76:
  
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=ktK256u0sN8 Overview of the EMO Heads]
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=ktK256u0sN8 Overview of the EMO Heads]
* [http://hyrel3d.net/downloads/Manuals/Data_EMO,COD.pdf Data Sheet for the EMO Heads]
 
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=h95IurET7UM Overview of the SDS Heads]
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=h95IurET7UM Overview of the SDS Heads]
* [http://hyrel3d.net/downloads/Manuals/Data_SDS,CSD.pdf Data Sheet for the SDS Heads]
 
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=9_onCKhT_dg Overview of the VOL Heads]
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=9_onCKhT_dg Overview of the VOL Heads]
* [http://hyrel3d.net/downloads/Manuals/Data_VOL,VCD.pdf Data Sheet for the VOL Heads]
 
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=QD2FrZ4kg1g Overview of the KRA Heads]
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=QD2FrZ4kg1g Overview of the KRA Heads]
* [http://hyrel3d.net/downloads/Manuals/Data_KRA,KCD.pdf Data Sheet for the KRA Heads]
 
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=DQj6oLfrbLo Overview of the SMH-2 Head]
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=DQj6oLfrbLo Overview of the SMH-2 Head]
 +
* Please see our [[Data Sheets]] as well.
  
 
{| border="1" class="wikitable" style="text-align: center; width: 85%;"  
 
{| border="1" class="wikitable" style="text-align: center; width: 85%;"  
 
|+ EMO-Type Head Comparison
 
|+ EMO-Type Head Comparison
 
! style="width: 10%;" | Temperature >
 
! style="width: 10%;" | Temperature >
! style="width: 10%;" | Down to -5°C >
+
! style="width: 10%;" | Down to 0°C >
 
! style="width: 10%;" | Ambient
 
! style="width: 10%;" | Ambient
 
! style="width: 10%;" | Up to 75°C
 
! style="width: 10%;" | Up to 75°C
Line 103: Line 100:
 
| [[TAM]]-15
 
| [[TAM]]-15
 
|}
 
|}
 +
Note, RSD-30 will take you about 20C below ambient.
  
 
So, what do these goofy designations actually stand for?
 
So, what do these goofy designations actually stand for?
Line 140: Line 138:
 
== Settings for Cold and Warm Flow Heads ==
 
== Settings for Cold and Warm Flow Heads ==
  
Non-Hydra units shipping through spring 2017 ship with Repetrel version 2.x. Hydra units, and other units shipping as of summer 2017 will have version 3.x, and should consult the version 3.x tables, below. All units should be upgraded to 3.x when it is available. If you run a head with v2 settings on a v3 install, the background will flash red; please make the two changes below:
+
Non-Hydra units shipping through spring 2017 ship with Repetrel version 2.x. Hydra units, and other units shipping as of summer 2017 will have version 3.x, and should consult the version 3.x tables, below. All units should be upgraded to 3.x when it is available. If you run a head with v2 settings on a v3 install, the background will flash red; please make the changes below:
  
 
{| class="wikitable" style="text-align: center;"
 
{| class="wikitable" style="text-align: center;"
Line 162: Line 160:
 
! style="width: 10%" | 27:1 Ratio
 
! style="width: 10%" | 27:1 Ratio
 
! style="width: 10%" | 51:1 Ratio
 
! style="width: 10%" | 51:1 Ratio
! style="width: 10%" | 100:1 KRA
+
! style="width: 10%" | 100:1 KRA<br> & EMO-XT
 
! style="width: 10%" | 100:1 KR2, TAM
 
! style="width: 10%" | 100:1 KR2, TAM
 
|-  
 
|-  
Line 219: Line 217:
 
|-  
 
|-  
 
! Maximum
 
! Maximum
| 0/100/200
+
| 0
| 0/100/200
+
| 0/80
| 0/100/200
+
| 0/80
| 0/100/200
+
| 0/80/150
| 0/100/200
+
| 0/80/150/250
 
|-  
 
|-  
 
!colspan="6"| Overrides
 
!colspan="6"| Overrides
Line 253: Line 251:
 
|-
 
|-
 
! Steps  
 
! Steps  
| 600
+
| 7000
| 800
+
| 6000
 
| 1000
 
| 1000
 
| 3000
 
| 3000
Line 267: Line 265:
 
|-  
 
|-  
 
! Dwell Time (ms)
 
! Dwell Time (ms)
| 100
+
| 600
| 100
+
| 500
 
| 100
 
| 100
 
| 300
 
| 300
Line 276: Line 274:
 
|-  
 
|-  
 
! Steps  
 
! Steps  
| 500
+
| 7000
| 650
+
| 6000
| 800
+
| 1000
| 2500
+
| 3000
| 5000
+
| 6000
 
|-
 
|-
 
! Rate
 
! Rate
Line 290: Line 288:
 
|-  
 
|-  
 
! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span>
 
! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''600'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''500'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''250'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''250'''''</span>
Line 297: Line 295:
 
|-
 
|-
 
! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span>
 
! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-600'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-500'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''-250'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''-250'''''</span>
Line 353: Line 351:
 
! style="width: 10%" | 27:1 Ratio
 
! style="width: 10%" | 27:1 Ratio
 
! style="width: 10%" | 51:1 Ratio
 
! style="width: 10%" | 51:1 Ratio
! style="width: 10%" | 100:1 Ratio
+
! style="width: 10%" | 100:1 KRA<br> & EMO-XT
 
! style="width: 10%" | 100:1 KR2, TAM
 
! style="width: 10%" | 100:1 KR2, TAM
 
|-
 
|-
Line 364: Line 362:
 
{| class="wikitable" style="text-align: center;"
 
{| class="wikitable" style="text-align: center;"
 
|+ Settings for Cold and Warm Flow Heads with PLASTIC Reservoirs  
 
|+ Settings for Cold and Warm Flow Heads with PLASTIC Reservoirs  
! rowspan="2" style="width: 15%" | Settings
+
! rowspan="2" style="width: 9%" | Settings
! colspan="5" | [[SDS]], [[HSD]], and [[RSD]] Heads (with or without COD)<br> (Various Tube Diameters, Standard Gear Ratios)
+
! colspan="6" | [[SDS]], [[HSD]], and [[RSD]] Heads (with or without COD)<br> (Various Tube Diameters, Standard Gear Ratios)
 
! colspan="1" | [[DSD-50]] (1:1)  
 
! colspan="1" | [[DSD-50]] (1:1)  
! colspan="2" | Special (with or without COD)
+
! colspan="3" | Special (with or without COD)
 
|-
 
|-
! style="width: 10%" | 1cc ET
+
! style="width: 9%" | 1cc ET
! style="width: 10%" | 5cc
+
! style="width: 9%" | 5cc
! style="width: 10%" | 10cc
+
! style="width: 9%" | 10cc
! style="width: 10%" | 30cc
+
! style="width: 9%" | 30cc
! style="width: 10%" | 60cc
+
! style="width: 9%" | 60cc
! style="width: 10%" | DSD-50
+
! style="width: 9%" | 150cc
! style="width: 10%" | [[SDS-10-Ardes]]
+
! style="width: 9%" | DSD-50
! style="width: 10%" | [[SDS-30XT]]
+
! style="width: 9%" | [[HSD-10-Ardes]]
 +
! style="width: 9%" | [[SDS-30XT]]
 +
! style="width: 9%" | [[SDS-60XT]]
 
|-  
 
|-  
!colspan="9"| Material
+
!colspan="11"| Material
 
|-  
 
|-  
 
! Type  
 
! Type  
 +
| Custom
 +
| Custom
 
| Custom
 
| Custom
 
| Custom
 
| Custom
Line 393: Line 395:
 
| (any)  
 
| (any)  
 
| (any)  
 
| (any)  
 +
| (any)
 +
| (any)
 
| (any)
 
| (any)
 
| (any)
 
| (any)
Line 406: Line 410:
 
| 1.600
 
| 1.600
 
| 1.600
 
| 1.600
 +
| 4.00
 
| 1.600
 
| 1.600
 
| 1.600
 
| 1.600
 
| 1.600
 
| 1.600
 +
| 1.6000
 
|-  
 
|-  
 
! Layer  
 
! Layer  
Line 416: Line 422:
 
| 0.300  
 
| 0.300  
 
| 0.300  
 
| 0.300  
 +
| 0.300
 +
| 0.300
 
| 0.300
 
| 0.300
 
| 0.300
 
| 0.300
 
| 0.300
 
| 0.300
 
|-  
 
|-  
!colspan="9"| Temp Info
+
!colspan="10"| Temp Info
 
|-  
 
|-  
 
! Print Temp  
 
! Print Temp  
Line 426: Line 434:
 
| 0
 
| 0
 
| 0
 
| 0
| 0* <br> *35 for HSD
+
| 0
 +
| 0
 
| 0
 
| 0
 
| 0
 
| 0
 
| 35
 
| 35
 +
| 0
 
| 0
 
| 0
 
|-  
 
|-  
 
! Power Factor
 
! Power Factor
 +
| 100
 +
| 100
 
| 100
 
| 100
 
| 100
 
| 100
Line 443: Line 455:
 
|-  
 
|-  
 
! Minimum
 
! Minimum
 +
| 0
 +
| 0
 
| 0
 
| 0
 
| 0
 
| 0
Line 457: Line 471:
 
| 0
 
| 0
 
| 0* <br> *75 for HSD
 
| 0* <br> *75 for HSD
 +
| 0
 
| 0
 
| 0
 
| 0
 
| 0
 
| 130
 
| 130
 +
| 0
 
| 0
 
| 0
 
|-  
 
|-  
!colspan="9"| Overrides
+
!colspan="11"| Overrides
 
|-  
 
|-  
 
! style="background-color: pink;" | <span style="color: maroon;">'''''Pulses: v2.x (~10nl)'''''</span>
 
! style="background-color: pink;" | <span style="color: maroon;">'''''Pulses: v2.x (~10nl)'''''</span>
Line 470: Line 486:
 
| style="background-color: pink;" | <span style="color: maroon;">'''''0.225'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''0.225'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''0.15'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''0.15'''''</span>
 +
| style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''0.135'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''0.135'''''</span>
 +
| style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span>
Line 479: Line 497:
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''62.5'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''62.5'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''30'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''30'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''27'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''20'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''18'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''22'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''650'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''20'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''200'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''900'''''</span>
 +
| style="background-color: powderblue;" | <span style="color: blue;">'''''86'''''</span>
 +
| style="background-color: powderblue;" | <span style="color: blue;">'''''25'''''</span>
 
|-  
 
|-  
! Feed Rate %  
+
! rowspan="2" | Feed Rate %  
| 1.000  
+
| rowspan="2" | 1.000  
| 1.000  
+
| rowspan="2" | 1.000  
| 1.000  
+
| rowspan="2" | 1.000  
| 1.000
+
| rowspan="2" | 1.000
| 1.000
+
| rowspan="2" | 1.000
| 1.000
+
| rowspan="2" | 1.000
| 1.000
+
| rowspan="2" | 1.000
| 1.000
+
| style="background-color: pink;" | <span style="color: maroon;">1.000</span>
 +
| rowspan="2" | 1.000
 +
| rowspan="2" | 1.000
 
|-  
 
|-  
|colspan="9"| '''Prime''' <br> ''Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.''
+
| style="background-color: powderblue;" | <span style="color: blue;">2.000</span>
 +
|-
 +
|colspan="11"| '''Prime''' <br> ''Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.''
 
|-  
 
|-  
 
! Steps  
 
! Steps  
| 500
+
| 7500
| 200
+
| 1500
| 200
+
| 3000
| 150
+
| 2250
| 100
+
| 1500
 +
| 1500
 
| 1
 
| 1
| 2000
+
| 9000
| 50
+
| 1125
 +
| 1500
 
|-
 
|-
 
! Rate
 
! Rate
Line 510: Line 536:
 
| 10,000  
 
| 10,000  
 
| 10,000  
 
| 10,000  
 +
| 10,000
 +
| 10,000
 
| 10,000
 
| 10,000
 
| 10,000
 
| 10,000
Line 517: Line 545:
 
|-  
 
|-  
 
! Dwell Time (ms)
 
! Dwell Time (ms)
 +
| 800
 +
| 150
 +
| 300
 +
| 300
 +
| 300
 +
| 300
 
| 100
 
| 100
| 100
+
| 900
| 100
+
| 300
| 100
+
| 300
| 100
 
| 1
 
| 200
 
| 100
 
 
|-  
 
|-  
|colspan="9"| '''Unprime'''  <br> ''Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.''
+
|colspan="11"| '''Unprime'''  <br> ''Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.''
 
|-  
 
|-  
 
! Steps  
 
! Steps  
| 400
+
| 7500
| 160
+
| 1500
| 160
+
| 3000
| 120
+
| 2250
| 80
+
| 1500
 +
| 1500
 
| 1
 
| 1
| 1600
+
| 9000
| 40
+
| 1125
 +
| 1500
 
|-
 
|-
 
! Rate
 
! Rate
Line 542: Line 574:
 
| 10,000  
 
| 10,000  
 
| 10,000
 
| 10,000
 +
| 10,000
 +
| 10,000
 
| 10,000  
 
| 10,000  
 
| 10,000  
 
| 10,000  
Line 549: Line 583:
 
|-  
 
|-  
 
! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span>
 
! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''800'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span>
 +
| style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''1'''''</span>
 
| style="background-color: pink;" | <span style="color: maroon;">'''''1'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''900'''''</span>
| style="background-color: pink;" | <span style="color: maroon;">'''''?'''''</span>
+
| style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span>
 +
| style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span>
 
|-  
 
|-  
 
! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span>
 
! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-800'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-150'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span>
 +
| style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''-1'''''</span>
 
| style="background-color: powderblue;" | <span style="color: blue;">'''''-1'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-160'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-900'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
+
| style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span>
 +
| style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span>
 
|-  
 
|-  
!colspan="9"| Offsets
+
!colspan="11"| Offsets
 
|-  
 
|-  
 
! Clone Head
 
! Clone Head
Line 574: Line 612:
 
| Off  
 
| Off  
 
| Off  
 
| Off  
 +
| Off
 +
| Off
 
| Off
 
| Off
 
| Off
 
| Off
Line 583: Line 623:
 
| 0,000  
 
| 0,000  
 
| 0,000  
 
| 0,000  
 +
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000  
 
| 0,000  
 +
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000
Line 593: Line 635:
 
| 0,000  
 
| 0,000  
 
| 0,000  
 
| 0,000  
 +
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000
 +
| 0,000
 
| 0,000  
 
| 0,000  
 
| 0,000  
 
| 0,000  
Line 603: Line 647:
 
| 0,000  
 
| 0,000  
 
| 0,000  
 
| 0,000  
 +
| 0,000
 +
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000
 
| 0,000
Line 610: Line 656:
 
| 0,000
 
| 0,000
 
|-  
 
|-  
!colspan="9"| Head Info
+
!colspan="11"| Head Info
 
|-  
 
|-  
 
! Model
 
! Model
 +
| (varies)
 
| (varies)
 
| (varies)
 
| (varies)
 
| (varies)
Line 618: Line 665:
 
| (varies)
 
| (varies)
 
| (varies)  
 
| (varies)  
 +
| (varies) 
 
| (varies)   
 
| (varies)   
 
| (varies)  
 
| (varies)  
Line 627: Line 675:
 
| None
 
| None
 
| None* <br>''*1k PLAT RTD<br>for HSD, RSD''
 
| None* <br>''*1k PLAT RTD<br>for HSD, RSD''
 +
| None
 
| None
 
| None
 
| None
 
| None
 
| 1k PLAT_RTD
 
| 1k PLAT_RTD
 +
| None
 
| None
 
| None
 
|-  
 
|-  
! rowspan="2" style="width: 15%" | Settings
+
! rowspan="2" style="width: 9%" | Settings
! style="width: 10%" | 1cc ET
+
! style="width: 9%" | 1cc ET
! style="width: 10%" | 5cc
+
! style="width: 9%" | 5cc
! style="width: 10%" | 10cc
+
! style="width: 9%" | 10cc
! style="width: 10%" | 30cc
+
! style="width: 9%" | 30cc
! style="width: 10%" | 60cc
+
! style="width: 9%" | 60cc
! style="width: 10%" | DSD-50
+
! style="width: 9%" | 150cc
! style="width: 10%" | [[HSD-10-Ardes]]
+
! style="width: 9%" | DSD-50
! style="width: 10%" | [[SDS-30XT]]
+
! style="width: 9%" | [[HSD-10-Ardes]]
 +
! style="width: 9%" | [[SDS-30XT]]
 +
! style="width: 9%" | [[SDS-60XT]]
 
|-
 
|-
! colspan="5" | [[SDS]], [[HSD]], and [[RSD]] Heads (with or without COD)<br> (Various Tube Diameters, Standard Gear Ratios)
+
! colspan="6" | [[SDS]], [[HSD]], and [[RSD]] Heads (with or without COD)<br> (Various Tube Diameters, Standard Gear Ratios)
 
! colspan="1" | [[DSD]]-50 (1:1)  
 
! colspan="1" | [[DSD]]-50 (1:1)  
! colspan="2" | Special (with or without COD)
+
! colspan="3" | Special (with or without COD)
 
|-
 
|-
 
|}
 
|}

Revision as of 13:36, 12 June 2019

Cold Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at room temperature, with or without UV Crosslinking.

Warm Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at elevated temperatures, with or without UV Crosslinking.

Materials for Cold and Warm Flow

Cold and Warm Flow heads are for printing as follows:

  • With pastes, gels, emulsifiables or waxes.
  • At room or elevated temperatures.
  • With or without UV Crosslining.
  • With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.

The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips.

The following materials can be printed from Warm Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips, or may print more easily at higher temperatures.

Heads for Cold and Warm Flow

Cold Flow is available through the following heads:

Warm Flow is available through the following heads:

EMO-Type Head Comparison
Temperature > Down to 0°C > Ambient Up to 75°C Up to 100°C Up to 180°C Up to 250°C
Crosslinking
Optional
RSD-30 EMO-25
SDS-5, -10,
SDS-30, -60
SMH-2
HSD-30
VOL-25
HSD-10 KRA-15
KR2-15
TAM-15

Note, RSD-30 will take you about 20C below ambient.

So, what do these goofy designations actually stand for?

EMO: Emulsifiables at Room Temperature - Low to Medium Viscosity
COD: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity
VOL: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity
KR2: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity
TAM: Tambora: Heated (up to 300°C) Emulsifiables - High Viscosity
SDS: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity
HSD: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity
RSD: Refrigerated Syringe Dispensing System - Low to Medium Viscosity
DSD: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity
SMH: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity

As of May, 2018, for S30 and ESR, the latest firmware is 32V, included with Repetrel 2.865; for EHR and Hydras, the latest firmware is the same, with Repetrel 3.075_A.

Research Papers Citing Hyrel Cold and Warm Flow

These are now listed by year here.

Firmware Versions for Cold and Warm Flow Heads

As of May, 2018, the following versions should be used for Repetrel versions 2.x and 3.x:

Use _TUBES_35K.hex :

  • For all emulsion heads performing prime/unprime actions.
  • For all emulsion heads with COD LED activity on constantly.

Use _TUBES_49V.hex :

  • For all emulsion heads using Clench Valves instead of prime/unprime actions.
  • For all emulsion heads using COD LED activity tied to printing moves only.

Use _FIL_250_PLAT_1A.hex :

  • For heated emulsions heads which don't seem to reach max temperature.

Settings for Cold and Warm Flow Heads

Non-Hydra units shipping through spring 2017 ship with Repetrel version 2.x. Hydra units, and other units shipping as of summer 2017 will have version 3.x, and should consult the version 3.x tables, below. All units should be upgraded to 3.x when it is available. If you run a head with v2 settings on a v3 install, the background will flash red; please make the changes below:

Values for version 2.x will be inicated in this manner.
Values for version 3.x will be inicated in this manner.

Note that you must flash these settings to the head to make them the new default.

Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings.

METAL Reservoir Heads

Settings for Cold and Warm Flow Heads with METAL Reservoirs
Settings EMO, VOL, KRA, COD, VCD, KCD Heads and New KR2 and TAM
(17mm Tubes, Various Gear Ratios)
19:1 Ratio 27:1 Ratio 51:1 Ratio 100:1 KRA
& EMO-XT
100:1 KR2, TAM
Material
Type Custom Custom Custom Custom Custom
Color (any) (any) (any) (any) (any)
Nozzle 1.600 1.600 1.600 1.600 1.600
Layer 0.300 0.300 0.300 0.300 0.300
Temp Info
Print Temp 35 35 35 35 35
Power Factor 100 100 100 100 100
Minimum 0 0 0 0 0
Maximum 0 0/80 0/80 0/80/150 0/80/150/250
Overrides
Pulses: v2.x (~10nl) 1.6 2.3 4.7 9.0 15.0
Pulses: v3.x (~1μl) 176 275 517 1000 600
Feed Rate % 1.000 1.000 1.000 1.000 1.000
2.000
Prime
Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.
Steps 7000 6000 1000 3000 6000
Rate 10,000 10,000 10,000 10,000 10,000
Dwell Time (ms) 600 500 100 300 600
Unprime
Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.
Steps 7000 6000 1000 3000 6000
Rate 10,000 10,000 10,000 10,000 10,000
Dwell Time (ms): v2.x 600 500 100 250 500
Dwell Time (ms): v3.x -600 -500 -100 -250 -500
Offsets
Clone Head Off Off Off Off Off
X 0,000 0,000 0,000 0,000 0,000
Y 0,000 0,000 0,000 0,000 0,000
Z 0,000 0,000 0,000 0,000 0,000
Head Info
Model (varies) (varies) (varies) (varies) (varies)
RTD Type 1k PLAT_RTD 1k PLAT_RTD 1k PLAT_RTD 1k PLAT_RTD 1k PLAT_RTD
Settings 19:1 Ratio 27:1 Ratio 51:1 Ratio 100:1 KRA
& EMO-XT
100:1 KR2, TAM
EMO, VOL, KRA, COD, VCD, KCD Heads and New KR2 and TAM
(17mm Tubes, Various Gear Ratios)

PLASTIC Reservoir Heads

Settings for Cold and Warm Flow Heads with PLASTIC Reservoirs
Settings SDS, HSD, and RSD Heads (with or without COD)
(Various Tube Diameters, Standard Gear Ratios)
DSD-50 (1:1) Special (with or without COD)
1cc ET 5cc 10cc 30cc 60cc 150cc DSD-50 HSD-10-Ardes SDS-30XT SDS-60XT
Material
Type Custom Custom Custom Custom Custom Custom Custom Custom Custom Custom
Color (any) (any) (any) (any) (any) (any) (any) (any) (any) (any)
Nozzle 1.600 1.600 1.600 1.600 1.600 4.00 1.600 1.600 1.600 1.6000
Layer 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.300
Temp Info
Print Temp 0 0 0 0 0 0 0 35 0 0
Power Factor 100 100 100 100 100 100 100 100 100 100
Minimum 0 0 0 0 0 0 0 0 0 0
Maximum 0 0 0 0*
*75 for HSD
0 0 0 130 0 0
Overrides
Pulses: v2.x (~10nl) 5.80 0.75 0.58 0.225 0.15 ? 0.135 ? ? ?
Pulses: v3.x (~1µl) 610 81 62.5 30 20 22 20 900 86 25
Feed Rate % 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1.000
2.000
Prime
Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.
Steps 7500 1500 3000 2250 1500 1500 1 9000 1125 1500
Rate 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
Dwell Time (ms) 800 150 300 300 300 300 100 900 300 300
Unprime
Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.
Steps 7500 1500 3000 2250 1500 1500 1 9000 1125 1500
Rate 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
Dwell Time (ms): v2.x 800 300 300 300 300 300 1 900 300 300
Dwell Time (ms): v3.x -800 -150 -300 -300 -300 -300 -1 -900 -300 -300
Offsets
Clone Head Off Off Off Off Off Off Off Off Off Off
X 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
Y 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
Z 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
Head Info
Model (varies) (varies) (varies) (varies) (varies) (varies) (varies) (varies) (varies) (varies)
RTD Type None None None None*
*1k PLAT RTD
for HSD, RSD
None None None 1k PLAT_RTD None None
Settings 1cc ET 5cc 10cc 30cc 60cc 150cc DSD-50 HSD-10-Ardes SDS-30XT SDS-60XT
SDS, HSD, and RSD Heads (with or without COD)
(Various Tube Diameters, Standard Gear Ratios)
DSD-50 (1:1) Special (with or without COD)