Difference between revisions of "3 Install"

From Hyrel3D
Jump to: navigation, search
(8 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
|}
 
|}
  
= '''''Everyone is now encouraged to upgrade to version 3.083_K''''' =
+
We do encourage all users to be on the latest version 3 release. You are welcome to remain on version 2 (or even 1), but we will only be able to provide limited support (and no bug fixes) to older versions. Please consider upgrading to the latest version.
  
<span style="color: red;">We encourage older 3.x upgrades to do a full install, since more than just the executables have been updated since the earliest (~3.06x) versions.</span>
 
  
<hr>
+
== Upgrade Overview ==
  
This page has instructions for installing the latest Repetrel software and associated applications, drivers, and environment (including new print head manuals) on a new Windows platform, or over an older install.  
+
Please follow the instructions detailed on the [[Installing|Installation Overview]] page. This is also the order listed in the quick access menu on the left side of every page on this wiki.
  
<span style="color: red;">These steps should each be done '''''in order,''''' and run '''''as administrator.'''''</span>
+
In brief:
 +
<br>0. [[Overview]]
 +
<br>1. [[WinRAR]]
 +
<br>2. [[Ecosystem_Apps]]
 +
<br> 3. [[Adobe_Reader]]
 +
<br> 4. Repetrel. Select ONE of the following
 +
<br> 4.1. [[2_Install|Version 2.865]]
 +
<br> 4.2. [[3_Install|Version 3.084c]] (you are here now)
 +
<br> 4.3. [[New_Install|Version 4.x]]
 +
<br> 5. [[Drivers]]
 +
<br> 6. [[Firmware]]
 +
<br> 7. [[Settings]]
 +
<br> 8. [[Recipes]]
 +
<br> 9. [[Licensing]] (not needed for v3)
  
== '''Install WinRAR''' ==
 
  
Go to https://www.rarlab.com/download.htm and install the latest WinRAR to extract our archives.
+
After you have completed steps 1-3, this page is step 4, the Repetrel download.
  
== '''Install Ecosystem Apps''' [[File:Download_button.png|150px|link=http://www.hyrel3d.net/downloads/updater/EcosystemApps.exe]] ==
+
== '''Repetrel''' [[File:Download_button.png|150px|link=http://hyrel3d.net/downloads/repetrel/repetrel_3.084c.rar]] ==
  
Ecosystem Apps is a suite of publicly available programs which add many features at no cost. Some of them you might use individually to create or modify models. Others might be called from Repetrel to manipulate a file. This install should all be carried out per the instructions below, so that Repetrel will find them in the expected locations.
+
The Repetrel download will install the Repetrel software (release 3.084c) as well as the firmware for your 407 (30M, ESR) or 429 (16A, EHR) Motion Controller, your 103 Print Head and Hot Bed Controllers, and controllers for the CO2 laser, 3-phase spindle tool, and extra axes. This install must be carried out per the instructions below, so that Repetrel and its dependent resources will be found in the expected locations.
  
# Download http://www.hyrel3d.net/downloads/updater/EcosystemApps.exe - see table below for the list of programs and their proper locations.
+
A video giving a quick overview is available at: https://youtu.be/VMyS3h4qiSA
# Run the executable, with the location pointed to <code>C:</code>
 
  
== '''Install the latest Adobe Reader''' ==
+
A video showing the actual upgrade process is available at: https://www.youtube.com/watch?v=n4QwiuQtjO0
  
Go to https://get.adobe.com/reader/ and install the latest version of Adobe Reader. Yes, you need to do this, as we have an embedded pdf viewer. Note that you can opt out of the other software Adobe will try to give you.
+
''<span style="color: red;">On new (clean) installs, you MUST run Slic3r.exe BEFORE launching Repetrel. Configure it to run in expert mode, then exit.</span>
  
== '''Install Repetrel''' [[File:Download_button.png|150px|link=http://hyrel3d.net/downloads/repetrel/repetrel_3.083_K_dfu_3.083e.rar]] ==
+
=== Installing Repetrel ===
  
This installs the current Repetrel directory, with Repetrel 3.083_G with firmware 3.083d for all models - the latest as of 02 Jan 2019.
+
# Download http://hyrel3d.net/downloads/repetrel/Repetrel_3.083_K.rar This contains:
 +
## Repetrel  
 +
## Motion Controller firmware
 +
## 103 PH/HB and other Controller firmware (see [[Firmware]] for compatibilities)
 +
# Extract the contents
 +
# Rename previous C:/repetrel to C:/repetrel.old (or similar)
 +
# Move your extracted repetrel directory to C:/repetrel
  
Just uncompress the file and '''place it at <code>C:</code>. '''
+
Software upgrade complete. Occasionally a user will have to point existing shortcuts to the new executible, C:/repetrel/bin/repetrel.exe
  
Your path to Repetrel.exe should be: '''<code>C:\Repetrel\bin\Repetrel.exe</code>''' (capitalization may differ).
+
[https://www.youtube.com/watch?v=n4QwiuQtjO0 Click here to watch a video of the software upgrade process.]
  
'''Entire Repetrel Directory:''' http://hyrel3d.net/downloads/repetrel/repetrel_3.083_K_dfu_3.083e.rar
+
[https://youtu.be/cFAFRkpLmww Click here to watch a video of the Motion Controller Firmware upgrade process.]
  
== '''Install Drivers''' ==
+
[https://youtu.be/yM8QMZBTb4o Click here to watch a video of the 103 HotHead/HotBed Controller Firmware upgrade process.]
  
'''''Note: This step is only required for new installs.'''''
+
== After Repetrel ==
  
Next, navigate to <code>C:\Repetrel\bin\_RUN_ME_ON_NEW_INSTALL</code> and execute each numbered file AS ADMINSTRATOR, IN ORDER:
+
Please proceed to steps 5-8 to complete your install or upgrade.
 
 
* <code>1.Windows 8 Compatibility Resolver.bat</code>
 
* <code>2.dpinst_amd64.exe</code>
 
* <code>3.dpinst_x86.exe</code>
 
* <code>4.CDM v2.12.00 WHQL Certified.exe</code>
 
* <code>5.VCP_V1.3.1_Setup_x64.exe</code>
 
* <code>6.VCP_V1.3.1_Setup.exe</code>
 
* <code>7.vcredist_ia64.exe</code>
 
* <code>8.vcredist_x64.exe</code>
 
* <code>9.vcredist_x86.exe</code>
 
 
 
== '''Configure Slic3r''' ==
 
 
 
'''''Note: This step is only required for new installs.'''''
 
 
 
Next, navigate to <code>C:\Users\hyrel\AppData\Roaming\Slic3r</code> (or whatever the user name is instead of hyrel) and:
 
 
 
* Launch Slicer.exe
 
* Go to File > Preferences
 
* Select '''Expert''' mode and click OK.
 
* Exit Slicer
 
 
 
Note: Latest slic3r recipes are [[Slicing|here]].
 
 
 
== '''Flashing Firmware''' ==
 
 
 
Next, we will flash the '''Motion Controller''' firmware. ''NOT the extruder or hotbed firmware'', which should be fine.  See the '''[[Firmware]]''' page.
 
 
 
== '''Configure Settings''' ==
 
 
 
Within Repetrel, follow the instructions at '''[[Settings]]'''.
 
 
 
That should be all there is! Please let me know if you have any questions. -Davo
 

Revision as of 11:38, 22 July 2019

We do encourage all users to be on the latest version 3 release. You are welcome to remain on version 2 (or even 1), but we will only be able to provide limited support (and no bug fixes) to older versions. Please consider upgrading to the latest version.


Upgrade Overview

Please follow the instructions detailed on the Installation Overview page. This is also the order listed in the quick access menu on the left side of every page on this wiki.

In brief:
0. Overview
1. WinRAR
2. Ecosystem_Apps
3. Adobe_Reader
4. Repetrel. Select ONE of the following
4.1. Version 2.865
4.2. Version 3.084c (you are here now)
4.3. Version 4.x
5. Drivers
6. Firmware
7. Settings
8. Recipes
9. Licensing (not needed for v3)


After you have completed steps 1-3, this page is step 4, the Repetrel download.

Repetrel Download button.png

The Repetrel download will install the Repetrel software (release 3.084c) as well as the firmware for your 407 (30M, ESR) or 429 (16A, EHR) Motion Controller, your 103 Print Head and Hot Bed Controllers, and controllers for the CO2 laser, 3-phase spindle tool, and extra axes. This install must be carried out per the instructions below, so that Repetrel and its dependent resources will be found in the expected locations.

A video giving a quick overview is available at: https://youtu.be/VMyS3h4qiSA

A video showing the actual upgrade process is available at: https://www.youtube.com/watch?v=n4QwiuQtjO0

On new (clean) installs, you MUST run Slic3r.exe BEFORE launching Repetrel. Configure it to run in expert mode, then exit.

Installing Repetrel

  1. Download http://hyrel3d.net/downloads/repetrel/Repetrel_3.083_K.rar This contains:
    1. Repetrel
    2. Motion Controller firmware
    3. 103 PH/HB and other Controller firmware (see Firmware for compatibilities)
  2. Extract the contents
  3. Rename previous C:/repetrel to C:/repetrel.old (or similar)
  4. Move your extracted repetrel directory to C:/repetrel

Software upgrade complete. Occasionally a user will have to point existing shortcuts to the new executible, C:/repetrel/bin/repetrel.exe

Click here to watch a video of the software upgrade process.

Click here to watch a video of the Motion Controller Firmware upgrade process.

Click here to watch a video of the 103 HotHead/HotBed Controller Firmware upgrade process.

After Repetrel

Please proceed to steps 5-8 to complete your install or upgrade.