Re: BROADCAST INFORMATION!

Converting meshes to GCode; recipe sharing.

Re: BROADCAST INFORMATION!

Postby Davo » Thu Oct 23, 2014 12:57 pm

Next Live Broadcast:

Sunday, November 22nd, 2015 @ 8pm EDT (2000hrs):

On UStream: http://www.ustream.tv/channel/hyrel

Agenda:

We've been working hard over these past couple of months with a few new head additions to your HYREL machine. Some of you may already be using our new technologies right now.

Those new head technologies which have been created and released have been, the Volcano, the Krakatoa, the COD (Cross-link On Demand), VCD (Volcano + COD tech), KCD (Krakatoa + COD tech), and the Spindle tool (ST1).

On this broadcast, we've added two more technologies to your arsenal... one of which we've discussed a little bit about in the past and I'll discuss a little bit about it right now.

Some of you may remember we have been working with lasers. Well, we hit a couple of challenges along the way to getting the right laser for your HYREL. First, we wanted to make sure it was going to be safe to use. I believe we have the safest solution for everyone. Second, finding the right components was another challenge. We believe the latest version will provide you with the abilities several of you have asked for - and, you'll need to tune-in tomorrow for us to show you what we've accomplished.

On top of all of this, we will be revamping the entire website, http://www.hyrel3d.com. Most of the information will be updated over the next couple of weeks to reflect the new head technologies.

Log in to chat, or lurk and listen.

Recording: http://www.ustream.tv/recorded/78289344
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Mon Oct 27, 2014 4:03 pm

The recording of this broadcast should be available on ustream for 30 days.

http://www.ustream.tv/recorded/54546881

After that, it should be available on youtube.
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Thu Nov 06, 2014 2:05 pm

Well, my apologies, but it seems we had a broadcast last night.

You can view the recording at http://www.ustream.tv/recorded/54983049
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Tue Nov 25, 2014 2:56 pm

Next live broadcast, Wed, 25 Nov, 2000 EST (8pm EST). http://www.ustream.tv/channel/hyrel

Recorded at http://www.ustream.tv/recorded/55863072
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Mon Jan 05, 2015 2:06 pm

We had another broadcast last night; sorry I didn't get the word out.

Recorded at: http://www.ustream.tv/recorded/57238797
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Thu Apr 02, 2015 10:12 pm

Next Live Broadcast: (Easter) Sunday, 5 April, at 8pm EDT.

http://www.ustream.tv/channel/hyrel
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Mon Apr 13, 2015 7:25 pm

Guess what? There was a broadcast last night.

http://www.ustream.tv/recorded/61054254
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Fri May 08, 2015 4:14 pm

Next Live Broadcast: Sunday, May 7th, 2015 @ 8pm EDT (2000hrs)

Lots of things have been 'cooking' in the lab. Join us this coming Sunday to find out what's the next step forward for 3D printing and your HYREL.

On UStream: http://www.ustream.tv/channel/hyrel
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Wed Jul 15, 2015 10:09 pm

Next Live Broadcast: Sunday, July 19, 2015 @ 8pm EDT (2000hrs)

Preview (postview?) of the latest software release, presently at 2.405 and counting (gotta love code control and auto versioning). Karl will probably demonstrate boring stuff like help menus, links to pdfs and videos, combining and subtracting stls and previewing the gcode, color coded by print head, "click to go to layer" in gcode, right-click to change fan speed or print temp at a certain layer, saving the whole job (multiple stls, as scaled/rotated/positioned, with recipes used for each stl, along with the generated gcode), improved temperature/power graphs, auto recipe refresh... *yawn*

On UStream: http://www.ustream.tv/channel/hyrel


Our YouTube Channel: https://www.youtube.com/channel/UCT-48K ... vbJCjyDFXA
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Re: BROADCAST INFORMATION!

Postby Davo » Fri Jul 24, 2015 9:43 pm

Next Live Broadcast: Sunday, July 26, 2015 @ 8pm EDT (2000hrs)

Yes, another live broadcast. I haven't been told the thrust of the content, so tune in and find out!

On UStream: http://www.ustream.tv/channel/hyrel


Recording: http://www.ustream.tv/recorded/78289344
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Next

Return to Slicing, Recipes & Settings

Who is online

Users browsing this forum: No registered users and 1 guest

cron