T-Glase with Simplify3D

Converting meshes to GCode; recipe sharing.

T-Glase with Simplify3D

Postby Davo » Mon Mar 30, 2015 2:41 pm

One of our users, Jeff, has graciously shared his settings for slicing in Simplify3D to print T-Glase on his Hyrel printer:

Here are the settings I use in simpify 3d
attached is the factory file that has all the settings. users of simplify will know what to do with this.
I will attach the gcode also.
system settings: temp 230c
pulse: .95
FR: 1.3 ( i know its high but simpify seems to under extrude and this setting works)
prime: .300 steps
unprime 440 steps (could be a little more getting a few oozes between long travel moves)
bed 60c
speed 20-30 mm/s
layer height: .25
rest of the settings I left default for ABS
I will do some more tweaking once I get done with this project.


Header data:
Code: Select all
; G-Code generated by Simplify3D(R) Version 2.2.2
; Mar 30, 2015 at 7:59:17 AM
; Settings Summary
;   processName,Process1
;   applyToModels,5in, Cradle BOTTOM SMALL LONG-3-26-15
;   profileLabel,hYREL ST30M-.5-.25LH-TGLASE.fff
;   printMaterial,
;   printQuality,
;   extruderName,T0,T1,T2,T3
;   extruderToolheadNumber,0,1,0,3
;   extruderDiameter,0.5,0.5,0.35,0.5
;   extruderAutoWidth,0,0,0,0
;   extruderWidth,0.56,0.55,0.43,0.6
;   extrusionMultiplier,1,1,1,1
;   extruderUseRetract,0,0,0,0
;   extruderRetractionDistance,1,1,1,1
;   extruderExtraRestartDistance,0,0,0,0
;   extruderRetractionZLift,0,0,0,0
;   extruderRetractionSpeed,1800,1800,1800,1800
;   extruderUseCoasting,0,0,0,0
;   extruderCoastingDistance,0.2,0.2,0.2,0.2
;   extruderUseWipe,0,0,0,0
;   extruderWipeDistance,5,5,5,5
;   primaryExtruder,3
;   layerHeight,0.25
;   topSolidLayers,6
;   bottomSolidLayers,3
;   perimeterOutlines,4
;   printPerimetersInsideOut,1
;   startPointOption,1
;   startPointOriginX,0
;   startPointOriginY,0
;   startPointOriginZ,300
;   sequentialIslands,0
;   spiralVaseMode,0
;   firstLayerHeightPercentage,100
;   firstLayerWidthPercentage,100
;   firstLayerUnderspeed,0.95
;   useRaft,0
;   raftExtruder,0
;   raftLayers,3
;   raftOffset,3
;   raftSeparationDistance,0.14
;   raftInfill,85
;   disableRaftBaseLayers,0
;   useSkirt,1
;   skirtExtruder,3
;   skirtLayers,1
;   skirtOutlines,1
;   skirtOffset,2
;   infillExtruder,3
;   externalInfillPattern,Rectilinear
;   infillPercentage,37
;   outlineOverlapPercentage,20
;   infillExtrusionWidthPercentage,100
;   minInfillLength,5
;   infillLayerInterval,1
;   randomInfillStartPoint,1
;   infillAngles,45,-45
;   generateSupport,1
;   supportExtruder,3
;   supportInfill,17
;   supportExtraInflation,0.2
;   denseSupportLayers,0
;   denseSupportInfill,50
;   supportLayerInterval,1
;   supportHorizontalPartOffset,0.7
;   supportUpperSeparationLayers,1
;   supportLowerSeparationLayers,1
;   supportGridSpacing,3.5
;   maxOverhangAngle,46
;   supportAngles,45,90
;   temperatureName,Extruder 1 Temperature,Heated Bed
;   temperatureNumber,3,0
;   temperatureSetpointCount,1,1
;   temperatureSetpointLayers,1,1
;   temperatureSetpointTemperatures,225,68
;   temperatureStabilizeAtStartup,1,0
;   temperatureHeatedBed,0,1
;   temperatureRelayBetweenLayers,0,0
;   temperatureRelayBetweenLoops,0,0
;   fanLayers,2
;   fanSpeeds,40
;   blipFanToFullPower,1
;   adjustSpeedForCooling,1
;   minSpeedLayerTime,25
;   minCoolingSpeedSlowdown,5
;   increaseFanForCooling,1
;   minFanLayerTime,20
;   maxCoolingFanSpeed,60
;   increaseFanForBridging,1
;   bridgingFanSpeed,100
;   use5D,1
;   relativeEdistances,0
;   allowEaxisZeroing,1
;   independentExtruderAxes,0
;   includeM10123,0
;   stickySupport,1
;   detectArcs,0
;   arcReplaceG2G3,0
;   arcRadialCompensation,1
;   gcodeXoffset,0
;   gcodeYoffset,0
;   gcodeZoffset,0
;   overrideMachineDefinition,1
;   machineTypeOverride,0
;   strokeXoverride,254
;   strokeYoverride,204
;   strokeZoverride,220
;   originOffsetXoverride,0
;   originOffsetYoverride,0
;   originOffsetZoverride,0
;   homeXdirOverride,-1
;   homeYdirOverride,-1
;   homeZdirOverride,-1
;   flipXoverride,-1
;   flipYoverride,1
;   flipZoverride,1
;   startingGcode,;-----------------------------------------,G21 ; set units to millimeters,;-----------------------------------------,G90 ; absolute coordinates,G1 F300 Z5,G1 F200 E3 ,G28 X0 Y0 ; home X and Y,G0 X0 Y21 ; move to desired origin,G92 X0 Y0 ; reset origin: X and Y,M83 ; relative extruder coordinates,G1 X.001 F1500,;-----------------------------------,M734 S60 ; set error reporting interval for redundant errors to every 60 seconds,;-----------------------------------------,M227 ; auto prime/unprime
;   layerChangeGcode,;-----------------------------------------,M756 S0.25,M790 ;announce new layer,;-----------------------------------------
;   toolChangeGcode,
;   endingGcode,;-----------------------------------------,M721 ; unprime,M103    ; Stop Extrusion,G91 ; relative,G0 Z5 ; raise Z,G90 ; absolute,G0 X25,G0 Y0,G28 X0 Y0,M104 T100 S0 ; turn off all hotheads,M140 S0 ; turn off hotbed,M84     ; disable motors,M103  ;make sure the hh motor is unlocked,M30 ; turn off manual control printing mask,;-----------------------------------------
;   createX3G,0
;   celebration,0
;   celebrationSong,Random Song
;   createMB5G,0
;   postProcessing,hyrelfixer.exe [output_filepath]
;   defaultSpeed,1800
;   outlineUnderspeed,0.55
;   solidInfillUnderspeed,0.77
;   supportUnderspeed,0.69
;   rapidXYspeed,1998
;   rapidZspeed,1002
;   minBridgingArea,50
;   bridgingExtrusionMultiplier,1
;   bridgingSpeedMultiplier,0.84
;   filamentDiameter,1.75
;   filamentPricePerKg,46
;   useMinPrintHeight,0
;   minPrintHeight,0
;   useMaxPrintHeight,0
;   maxPrintHeight,0
;   useDiaphragm,0
;   diaphragmLayerInterval,20
;   robustSlicing,1
;   mergeAllIntoSolid,0
;   onlyRetractWhenCrossingOutline,0
;   retractBetweenLayers,0
;   useRetractionMinTravel,0
;   retractionMinTravel,3
;   useRetractionOozeRate,0
;   retractionOozeRate,6000
;   onlyWipeOutlines,0
;   toolChangeRetractionDistance,12
;   toolChangeExtraRestartDistance,-0.5
;   toolChangeRetractionSpeed,600
;   allowThinWallGapFill,1
;   thinWallAllowedOverlapPercentage,10
;   horizontalSizeCompensation,0


Footer data:
Code: Select all
;-----------------------------------------
; Build Summary
;   Build time: 8 hours 59 minutes
;   Filament length: 49164.4 mm (49.16 m)
;   Plastic volume: 118254.33 mm^3 (118.25 cc)
;   Plastic weight: 147.82 g (0.33 lb)
;   Material cost: 6.80


Factory file: http://hyrel3d.net/downloads/s3d/TGlaze.3-26-15.factory

Thanks, Jeff!
Hyrel 3D's Primary Simplificator
Ha, ha, made you look!
User avatar
Davo
Site Admin
 
Posts: 357
Joined: Tue Feb 04, 2014 10:53 pm

Return to Slicing, Recipes & Settings

Who is online

Users browsing this forum: No registered users and 1 guest

cron